On the Roller-Die Drawing

On the Optimum Die Shape in Rod Drawing Process Considering Work-Hardening Effect of Material

The assessment of the influence of the work-hardening of material on the optimum die profile and drawing force  in rod drawing process is the main objective of the present paper. The upper bound solution, based on the assumption of perfect plasticity, has been extended to consider the work-hardening of the material during the rod drawing process through curved dies. Analytical results of drawin...

On the optimum die angle in rod drawing process considering strain-hardening effect of material

In this paper, rod drawing process of strain-hardening materials is investigated by analytical, numerical and experimental methods. The classic upper bound solution, based on the assumption of perfect plasticity, has been extended to consider the work-hardening of the material during the drawing process. For a given process conditions and mechanical properties of the rod material, the power ter...

The "right to die": on drawing (and erasing) lines.

analytical evaluation of the effect of die and punch profile radii on deep drawing force

in this study, the formation of different parts of a cup during deep drawing process has been investigated analytically using the geometrical relationships. for a given punch travel, the effects of the bending angle, and those of the die and shoulder radii on the flange and die shoulder strains were examined. in addition, different components of the deformation force were calculated and the pun...

Optimum Die Design in Drawing of Square Section Rod from Round Bar

Drawing of square section rod from round bar can be done with two die shapes. In the first die shape, deformation starts from corners of the square and in second die shape, deformation starts from sides of square. This article has compared the drawing force for both die shapes and as a result optimum die shape was determined. Due to complexity of metal flow inside the die, analyzing of actual p...