On the Residual Stress due to Rotary Bending of Steel

survey on the rule of the due & hindering relying on the sheikh ansaris ideas

قاعده مقتضی و مانع در متون فقهی کم و بیش مستند احکام قرار گرفته و مورد مناقشه فقهاء و اصولیین می باشد و مشهور معتقند مقتضی و مانع، قاعده نیست بلکه یکی از مسائل ذیل استصحاب است لذا نگارنده بر آن شد تا پیرامون این قاعده پژوهش جامعی انجام دهد. به عقیده ما مقتضی دارای حیثیت مستقلی است و هر گاه می گوییم مقتضی احراز شد یعنی با ماهیت مستقل خودش محرز گشته و قطعا اقتضاء خود را خواهد داشت مانند نکاح که ...

The Effect of Multiple Bending of Wire on the Residual Stresses of High Carbon Steel Wires

R. Kruzel, M. Suliga, Czestochowa University of Technology, Czestochowa, Poland Steel tire cord, springs and rope wires belong to the group of metal products from which the low residual stresses are required. In this paper the eff ect of multiple bending of wire on residual stresses of high carbon steel wires has been assessed. It was found that the application of the multi-roller straightening...

Applied on the Rotary Draw Bending Process

I / RESIDUAL STRESS DISTRIBUTION IN FeAl WELD OVERLAY ON STEEL

Neutron diffraction was used to measure the residual stress distribution in an FeAl weld overlay on steel. It was found that the residual stresses accumulated during welding were essentially removed by the post-weld heat treatment that was applied to the specimen; most residual stresses in the specimen developed during cooling following the post-weld heat treatment. The experimental data were c...

Measuring of Residual Stress in TIG Welding of the 304 Stainless Steel by Ultrasonic Method

In this research, the effect of different welding parameters on residual stress and microstructure of the weld region, as well as the comparison of two methods of measuring residual stress using critical fracture longitudinal wave method and preformation method have been investigated. For this purpose, the taguchi DOE methodology is used as a statistical method to optimize four parameters of pu...