On the Premix Dry Mortar Using Processed Blastfurnace Slag as Fine Aggregate.
نویسندگان
چکیده
منابع مشابه
Durability of Mortar Incorporating Ferronickel Slag Aggregate and Supplementary Cementitious Materials Subjected to Wet–Dry Cycles
This paper presents the strength and durability of cement mortars using 0–100% ferronickel slag (FNS) as replacement of natural sand and 30% fly ash or ground granulated blast furnace slag (GGBFS) as cement replacement. The maximum mortar compressive strength was achieved with 50% sand replacement by FNS. Durability was evaluated by the changes in compressive strength and mass of mortar specime...
متن کاملRecovering industrial sludge-derived slag as fine aggregate.
This study presents the result of using melting to recover both industrial sludge slag (the main constituent of which is calcium fluoride) and water works sludge slag as fine aggregate in cement. The main characteristics of both slag and cement mortars were measured to evaluate the feasibility of using slag as aggregate. In this study, the slag replacement ratios were 0, 10, 20, 30, 40, and 50%...
متن کاملapplication of sewage dry sludge as fine aggregate in concrete
the present work has been performed to eliminate sewage dry sludge of alborze city wastewater treatment plant by using them as fine aggregate in concrete. on this basis, at first the selected dry sludge was analyzed for xrd and xrf for crystalline phases and chemical composition, respectively. the results showed that more than 50% of the sludge is formed of sio2 and it had more than 20% organic...
متن کاملInvestigating the Effect of Using Cross-Linked Polyethylene Waste as Fine Aggregate on Mechanical Properties of Hot Mix Asphalt
Cross-linked polyethylene (XLPE) is an appropriate insulating material for high-voltage cables which has been widely used as electrical cable coating. In this study, Crushed XLPE wastes with different volume percentages (25, 50, and 75%) were used in hot mix asphalt (HMA) as a substitute for fine aggregates remained on sieve no. 8 whose size varies from 1.18 to 2.36 mm. The dynamic stiffness (i...
متن کاملProperties of Cement Mortar by Use of Hot-Melt Polyamides as Substitute for Fine Aggregate
This paper presents an experimental study on use of hot-melt polyamide (HMP) to prepare mortar specimens with improved crack healing and engineering properties. The role of HMP in the crack repairing of cement mortar subjected to several rounds of heat treatment was investigated. Compatibility between HMP and hydraulic cement was investigated through X-ray diffraction (XRD) and Fourier transfor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Shigen-to-Sozai
سال: 2002
ISSN: 0916-1740,1880-6244
DOI: 10.2473/shigentosozai.118.425