On the Mechanism of Precipitation Hardening in Fe-Ni-Cr-Ti Alloy
نویسندگان
چکیده
منابع مشابه
Evolution of magnetization reversal mechanism in Fe-Cr alloy films
A large thin film sample of FexCr1−x alloy with a composition gradient x=0.38−0.52 has been prepared by co-sputtering to investigate magnetic anisotropy and magnetization effects on reversal mechanisms. The single-phased Fe-Cr films have a bcc structure with 110 preferred orientation. Since the magnetization decreases as the Fe content is decreased and the uniaxial anisotropy energy keeps at al...
متن کاملMechanism of Bainite Transformation in Fe-Cr-Mo-V-Ti-C Steel
The kinetics and mechanism of bainite transformation have been studied in Fe-Cr-Mo-V-Ti-C steel high speed dilatometry backed by thermodynamic analysis. The complete transformation of austenite, however, has not occurred at any reported temperature. Obtained results confirm the incomplete reaction phenomenon with the cessation of the bainite transformation well before the paraequilibrium is ach...
متن کاملInvestigations of Surface Dissolution on Fatigue Crack Nucleation in Ni - 22 Cr - 2 Fe Alloy
Ni-Cr-Fe alloy specimens were fatigued in a hydrochloric acid solution cell at pH 5.6 ±0.1. Results show that the number of surface slip bands forming, extending, and widening increased with the number of cycles. Results also indicated that, initially, cracks initiated as transgranular features but took on intergranular forms as the number of cycles increased.
متن کاملNanostructurization of Fe-Ni Alloy
Data about an effect of cyclic γ-α-γ martensitic transformations on the structure state of reverted austenite Fe-31.7 wt.% Ni-0.06 wt.% C alloy are presented. The effect of multiple direct γ-α and reverse α-γ martensitic transformations on fragmentation of austenitic grains has been investigated by electron microscopy and X-ray diffraction methods. An ultrafine structure has been formed by nano...
متن کاملPhotoelectrochemical Water Splitting Properties of Ti-Ni-Si-O Nanostructures on Ti-Ni-Si Alloy
Ti-Ni-Si-O nanostructures were successfully prepared on Ti-1Ni-5Si alloy foils via electrochemical anodization in ethylene glycol/glycerol solutions containing a small amount of water. The Ti-Ni-Si-O nanostructures were characterized by field-emission scanning electron microscopy (FE-SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), and diffuse reflectance absorption spectra....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1968
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.32.6_504