On the Manufacture of 13 Cr Stainless Steel Powder by Liquid Atomization

Compressibility of 304 Stainless Steel Powder Metallurgy Materials Reinforced with 304 Short Stainless Steel Fibers

Powder metallurgy (P/M) technique is usually used for manufacturing porous metal materials. However, some P/M materials are limitedly used in engineering for their performance deficiency. A novel 304 stainless steel P/M material was produced by a solid-state sintering of 304 stainless steel powders and 304 short stainless steel fibers, which were alternately laid in layers according to mass rat...

A MODEL FOR CALCULATING RATES OF GENERAL CORROSION OF CARBON STEEL AND 13%Cr STAINLESS STEEL IN CO2/H2S ENVIRONMENTS

A model has been developed for calculating the rates of general corrosion of carbon steel and 13%Cr steel in aqueous systems containing carbon dioxide, hydrogen sulfide and other components. The model combines a comprehensive thermodynamic speciation module with electrochemical computations based on the mixed-potential theory. The electrochemical calculations recognize the effects of various pa...

Effects of powder recycling on stainless steel powder and built material properties in metal powder bed fusion processes

The Manufacture of Steel

Iron occurs mainly as oxide ores, though it is also found in smaller quantities as its sulfide and carbonate. These other ores are usually first roasted to convert them into the oxide. On a world scale the most important ore is haematite (Fe2O3), but in New Zealand the starting materials are magnetite (Fe3O4) and titanomagnetite (Fe2TiO4). The oxides are reduced with carbon from coal, through t...

The Effect of Nitrogen on Martensite Formation in a Cr-Mn-Ni Stainless Steel

The influence of nitrogen (0 to 0.27 wtYo) on martensite formation in an experimental low-nickel stainless-steel alloy (Fe-17Cr-7Mn-4Ni) has been investigated. The alloys containing 0.1 wtYo or more nitrogen are fully austenitic at room temperature; those containing less nitrogen consist of a mixture of austenite, martensite and S-ferrite. The alloys containing less than 0.2 wtYo nitrogen are m...