منابع مشابه
TEM INVESTIGATIONS OF WC-Co ALLOYS AFTER CREEP EXPERIMENTS
Carbide tungsten cobalt alloys were deformed in compression or in three point bending in a temperature range 1000-1350°C and in a stress domain 30-1000MPa. In these conditions, the stress exponent n of WC-CO alloys is a function of only the cobalt volurnic ratio and tends tow rds n = 1 for pure B carbide. The apparent activation energy is 550 kj mole. T.E.M. investigations on pure carbide defor...
متن کاملFRACTURE AND FATIGUE BEHAVIOR OF WC-Co AND WC-CoNi CEMENTED CARBIDES
The fracture and fatigue characteristics of several cemented carbide grades are investigated as a function of their microstructure. In doing so, the influence of binder chemical nature and content (Co and 76wt%Co-24wt%Ni), as well as carbide grain size on hardness, flexural strength, fracture toughness and fatigue crack growth (FCG) behavior is evaluated. Mechanical testing is combined with a d...
متن کاملThe Influence of Carbon Content and Additions of Growth Inhibitors (V,Cr) on the Formation of Melt in WC-Co and WC-Ni Alloys
The start of melting as well as the melting range in WC-Co and WC-Ni hardmetals is significantly influenced by the alloy gross carbon content as well as by additives (V, Cr). Both Vanadium and Chromium significantly lower the start of melting but also broaden the melting range, in particular at low carbon content (formation of M6C-phases). As a result, a certain temperature range can be defined...
متن کاملA study on the mechanical behaviour of WC/Co hardmetals
The hardmetal cutting tools used in machining are submitted to extreme conditions in terms of temperature and mechanical loading. A better understanding of the failure of cutting tools and capability to predict tool life are key factors in the development of new tool materials with improved mechanical behaviour. Main failure mechanisms are wear, thermal–mechanical fatigue and brittle fracture. ...
متن کاملsurvey on the rule of the due & hindering relying on the sheikh ansaris ideas
قاعده مقتضی و مانع در متون فقهی کم و بیش مستند احکام قرار گرفته و مورد مناقشه فقهاء و اصولیین می باشد و مشهور معتقند مقتضی و مانع، قاعده نیست بلکه یکی از مسائل ذیل استصحاب است لذا نگارنده بر آن شد تا پیرامون این قاعده پژوهش جامعی انجام دهد. به عقیده ما مقتضی دارای حیثیت مستقلی است و هر گاه می گوییم مقتضی احراز شد یعنی با ماهیت مستقل خودش محرز گشته و قطعا اقتضاء خود را خواهد داشت مانند نکاح که ...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1968
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.32.11_1128