On the Diffusion of Ternary Electrodeposited Layers of Fe-Ni-Cr and Fe-Cr-Ni

Magnetocaloric Properties of Fe-Ni-Cr Nanoparticles for Active Cooling

Low cost, earth abundant, rare earth free magnetocaloric nanoparticles have attracted an enormous amount of attention for green, energy efficient, active near room temperature thermal management. Hence, we investigated the magnetocaloric properties of transition metal based (Fe70Ni30)100-xCrx (x = 1, 3, 5, 6 and 7) nanoparticles. The influence of Cr additions on the Curie temperature (TC) was s...

Preparation and Test of Fe / Cr / Al - Ni / Cr Composite Film Micro - heater

MEMS gas sensor is one of the development directions of the sensor, and it must work at a certain temperature, so micro heater is an important part of MEMS gas sensor. In this paper, aiming at the high cost and complex process of Pt film heater, we developed the research of Fe/Cr/Al and Ni/Cr cheap metals replacing Pt metal. With Fe/Cr/Al and Ni/Cr metal as the targets respectively, Fe/Cr/Al an...

Microstructural Examination of Ni-ion Irradiated Fe-Ni-Cr Alloys Followed to Micro-zone Deformation

Examination of deformation microstructures induced by micro-indentation technique by means of transmission electron microscopy following an MV range metallic ion irradiation was performed in order to study the influence of irradiation-produced microstructural defects on plastic deformation behavior of materials. In this work, specimens of an Fe-Cr-Ni austenitic model ternary alloy before and af...

Ternary Ni-Fe-Co Alloys Nanowire Electrodeposition

Nanowire is a cylindrical nano-structure with nanometer dimensions. In this research, the studied nanowire was made from the magnetic triple Ni-Fe-Co alloy.&#10 We utilized ordered porous anodic aluminum oxide as a template for the nanowire deposition. The nanowire arrays were electrodeposited in the cylindrical pores of the oxide layer by AC potential in a simple sulfate bath. Then the relatio...

Large Scale DD Simulation Results for Crystal Plasticity Parameters in Fe-Cr and Fe-Ni Systems