On polishing of diamond film with hot metal. Polishing mechanism.
نویسندگان
چکیده
منابع مشابه
Chemical mechanical polishing of thin film diamond
The demonstration that Nanocrystalline Diamond (NCD) can retain the superior Young’s modulus (1100 GPa) of single crystal diamond twinned with its ability to be grown at low temperatures (<450 C) has driven a revival into the growth and applications of NCD thin films. However, owing to the competitive growth of crystals the resulting film has a roughness that evolves with film thickness, preven...
متن کاملModeling of Polishing Mechanism in Magnetic Abrasive Polishing
Magnetic Abrasive Polishing (MAP) is a super-finishing process primarily used for polishing of nonmagnetic and hard materials like, ceramics and stainless steel. This paper deals with the detailed parametric study in polishing of stainless steel work surface. Statistically designed experiments based on Taguchi methods show that size-ratio, tool-work surface clearance, polishing speed, magnetic ...
متن کاملPolishing of polycrystalline diamond by the technique of dynamic friction, part 4: Establishing the polishing map
Through a systematic experimental investigation into the polishing of polycrystalline diamond composites by the dynamic friction technique, this paper identified three major regimes of polishing conditions: the regime capable of a low material removal, that enabling a safe, high removal processing, and that of an unsafe but ultra-high material removal. The study concluded that a higher polishin...
متن کاملSilica based polishing of {100} and {111} single crystal diamond
Diamond is one of the hardest and most difficult to polish materials. In this paper, the polishing of {111} and {100} single crystal diamond surfaces by standard chemical mechanical polishing, as used in the silicon industry, is demonstrated. A Logitech Tribo Chemical Mechanical Polishing system with Logitech SF1 Syton and a polyurethane/polyester polishing pad was used. A reduction in roughnes...
متن کاملPolishing of polycrystalline diamond by the technique of dynamic friction. Part 2: Material removal mechanism
This paper investigates the material removal mechanisms of PCD using the dynamic friction polishing technique. Scanning electron microscopy, energy dispersive X-ray, X-ray diffraction and Raman spectroscopy were used to identify the mechanisms by analyzing the specimen surfaces and debris produced by polishing. It was found that the material removal occurred in a rather complex way, which can b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 1991
ISSN: 1882-675X,0912-0289
DOI: 10.2493/jjspe.57.504