On mechanical and morphological investigations of tungsten inert gas welded SS 304 thin pipe joints
نویسندگان
چکیده
منابع مشابه
Evaluation Of Mechanical Properties Of Dissimilar Metal Tube Welded Joints Using Inert Gas Welding
Evaluation of welding process such as metal inert gas welding and tungsten inert gas arc welding on tensile, bend and hardness properties of austenitic stainless steel SS347H(18Cr 10Ni 1Cb ), T22(21⁄4Cr Mo) and T91(9Cr 1Mo V) grades are studied. Tubes of 54 mm of outer diameter and 4 mm of wall thickness is used as a base material in the following combination SS347H VS T91 and T91 VS T22 is wel...
متن کاملApplication Of Artificial Neural Network In Predicting The Weld Quality Of A Tungsten Inert Gas Welded Mild Steel Pipe Joint
The weld quality of Tunston inert gas welded joint has been investigated to identify the most economical weld parameters that will bring about optimum properties. Artificial neural network, has been used in the prediction and optimization of the Tunston inert gas weld of mild steel pipes. Neural network model was generated using the Levenberg-Marquardt algorithm with feed ward back propagation ...
متن کاملEffect of Process Parameters on Angular Distortion of Gas Tungsten Arc Welded SS 302 and MS Plate
Tungsten Inert Gas (TIG) welding is a widely applied manufacturing process. Angular distortion is a major problem and most pronounced among different types of distortion in the butt welded plates. This angular distortion is mainly due to nonuniform transverse shrinkage along the depth of the plates welded. Restriction of this distortion by restraint may lead to higher residual stresses. However...
متن کاملMechanical Characterization of Friction Welded AISI 304 Steels
There are many industries where austenitic stainless steel needs to be welded specially in power generation industries. Unfortunately the austenitic stainless welding has several fabrication and metallurgical drawbacks when welded by using conventional fusion welding methods, which can often leads to in-service failure. The most pronounced fabrication faults are hot cracks due to inadvertent us...
متن کاملPrediction of bead reinforcement height and width of Gas Tungsten Arc Welded bead-on plate joints using Artificial Neural Network
A number of welding parameters are responsible for the quality of welds. The modeling of weld bead shape is important for predicting the quality of welds. In this paper, an attempt has been made to develop a back-propagation neural network (BPNN) model for the prediction of reinforcement height and width of bead in GTA bead-on plate welding process. The experimental results were used as testing...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Measurement and Control
سال: 2020
ISSN: 0020-2940
DOI: 10.1177/0020294019885152