On Heat Transfer Mechanism of Nucleate Boiling with MEMS Sensors (1st Report, Temperature Measurement beneath Boiling Bubble)

Heat transfer in nucleate pool boiling of multicomponent mixtures

Steady state pool boiling heat transfer coefficients have been obtained experimentally for acetone–isopropanol–water and acetone–MEK (methyl ethyl ketone)–water ternary systems. The data show that, for a given heat flux, the heat transfer coefficients of mixtures are lower than those obtained for pure components constituting the mixture. The measured heat transfer coefficients were compared wit...

Experimental Study for Investigating the Mechanism of Heat Transfer near the Critical Heat Flux in Nucleate Pool Boiling

Heat transfer coefficient in nucleate pool boiling near critical heat flux at least one orderhigher than the convectional heat transfer modes. In this paper, an experimental setup isdesigned and fabricated to investigate the mechanism of heat transfer from boiling surface tobulk liquid near critical heat flux. The images of pool boiling near the high heat flux regionreveals that the individual ...

The Influence of Surface Roughness on Nucleate Pool Boiling Heat Transfer

Nucleate Boiling and Critical Heat Flux From Protruded Chip Arrays During Flow Boiling

The effects of chip protrusion on the forced-convection boiling and critical heat flux (CHF) of a dielectric coolant (FC-72) were investigated. The multi-chip module used in the present study featured a linear array of nine, 10mm x 10 mm, simulated microelectronic chips which protruded 1 mm into a 20-mm wide side of a rectangular flow channel. Experiments were performed in vertical upflow with ...

Distribution of Impurities Concentration in Nucleate Boiling

The development of the mathematical model of mass transfer and diffusion process can determine the behavior of dissolved impurities in the flow boiling within viscous sublayer. Application of a new model to calculate the distribution of dissolved impuritiesconcentration within viscous sublayer and estimation of its thickness based on heat conduction layer and evaporation layer (macro-microlayer...