On Fracture Behavior of Brittle Cylindrical Shells Subjected to Concentrated Impulsive Loading

Optimization of Cylindrical Shells Under Combined Loading Against Brittle Creep Rupture

Optimal structural design of cylindrical shells under overall bending, torsion, tension and internal pressure in creep conditions is considered. The material is assumed to be governed by the Norton-Odqvist nonlinear steady creep law. Minimal weight of the shell is the design objective, radius and wall thickness are design variables, and the constraint refers to brittle creep rupture as describe...

Fracture Response of Externally Flawed Cylindrical Shells to Internal Gaseous Detonation Loading

Experiments were performed to observe the fracture behavior of thin-wall and initially-flawed aluminum tubes to internal gaseous detonation loading. The pressure load, with speeds exceeding 2 km/s, can be characterized as a pressure peak (ranging from 2 to 6 MPa in these experiments) followed by an expansion wave. Flaws were machined as external axial surface notches. Cracks ran both in the ups...

Prediction of Deformation of Circular Plates Subjected to Impulsive Loading Using GMDH-type Neural Network

In this paper, experimental responses of the clamped mild steel, copper, and aluminium circular plates are presented subjected to blast loading. The GMDH-type neural networks (Group Method of Data Handling) are then used for the modelling of the mid-point deflection thickness ratio of the circular plates using those experimental results. The aim of such modelling is to show how the mid-point de...

Computational Modelling of Concrete Structures Subjected to High Impulsive Loading

Parametric Study of Plastic Load of Cylindrical Shells With Opening Subject to Combined Loading

In this paper, the plastic limit load of cylindrical shells with opening subject to combined bending moment and axial force are found by finite element method using ANSYS suite of program. The effect of various parameters such as the geometrical ratios of shell and the shape, size, axial and angular position of the opening on the limit load of cylindrical shells under various loading conditions...