On Dew-Point Corrosion at Marine Boilers

Constant Dew Point Corrosion Tests for Metals

Dew point measurement using a sensitive circuit type of dew point sensor

Received: 13 Mar. 2012; Revised 25 Jul. 2012; Accepted 04 Aug. 2012 Received: April 8, 2012; Revised May 4, 2012; Accepted June 6, 2012 Abstract: Aiming at the problem of atmospheric humidity measurement, this paper proposes a method to measure dew point based on sensitive circuit for the first time. We use the quartz crystal in the Colpitts circuit as the humidity sensitive element. Since the ...

The measurement of tiny dew droplets at the initial deposition stage and dew point using a phase-shift interference microscope

The shape of a dew droplet deposited on the mirror surface of a copper plate was measured accurately using an interference microscope that employed a phase-shift technique. The microscope was constructed by adding a piezoelectric transducer to an interference microscope. A simple method that uses a conventional speaker horn and an optical fibre cable was used to depress any speckle noise. The s...

Assessing Marine Microbial Induced Corrosion at Santa Catalina Island, California

High iron and eutrophic conditions are reported as environmental factors leading to accelerated low-water corrosion, an enhanced form of near-shore microbial induced corrosion. To explore this hypothesis, we deployed flow-through colonization systems in laboratory-based aquarium tanks under a continuous flow of surface seawater from Santa Catalina Island, CA, USA, for periods of 2 and 6 months....

A micro dew point sensor with a thermal detection principle

We present a dew point temperature sensor with the thermal detection of condensed water on a thin membrane, fabricated by silicon micromachining. The membrane (600 × 600 ×∼1 μm3) is part of a silicon chip and contains a heating element as well as a thermopile for temperature measurement. By dynamically heating the membrane and simultaneously analyzing the transient increase of its temperature i...