On crack propagation in a nonlinear coupled thermo-mechanical system
نویسندگان
چکیده
منابع مشابه
Thermo-Mechanical Fatigue Crack Growth of RR1000
Non-isothermal conditions during flight cycles have long led to the requirement for thermo-mechanical fatigue (TMF) evaluation of aerospace materials. However, the increased temperatures within the gas turbine engine have meant that the requirements for TMF testing now extend to disc alloys along with blade materials. As such, fatigue crack growth rates are required to be evaluated under non-is...
متن کاملMechanical Characteristics on Fatigue Crack Propagation in Aluminium Plate
This paper present a mechanical characteristics on fatigue crack propagation in Aluminium Plate based on strain and stress distribution using the abaqus software. The changes in shear strain and stress distribution during the fatigue cycle with crack growth is identified. In progressive crack in the strain distribution and the stress is increase in the critical zone. Numerical Modal analysis of...
متن کاملNonlinear energy harvesting through a multimodal electro-mechanical system
A semi-analytical method is used to illustrate the behavior of a multimodal nonlinear electromechanical system which is under base-excitation. System is considered as piezo-ceramic patches attached to a cantilever beam coupled to a resistive load. The cantilever beam is modeled as a nonlinear Timoshenko beam using Assumed Mode method and equations of motion are derived through Lagrange's equati...
متن کاملOn a nonstationary nonlinear coupled system ∗
In this paper, a strongly nonlinear coupled elliptic-parabolic system modelling a class of engineering problems with heat effect is studied. Existence of a weak solution is first established by Schauder fixed point theorem, where the coupled functions σ(s), k(s) are assumed to be bounded. The uniqueness of the solution is obtained by applying Meyers’ theorem and assuming that σ(s), k(s) are Lip...
متن کاملHold-time effect on the thermo-mechanical fatigue crack growth behaviour of Inconel 718
In-phase TMF crack growth testing with different lengths of the hold time at the maximum temperature of 550C has been conducted on Inconel 718 specimens. Focus has been on establishing a method for TMF crack growth testing and investigating the effect of high temperature hold times on the TMF crack growth of the material. The tests are compared to isothermal crack propagation tests and show go...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mathematical Modelling
سال: 1987
ISSN: 0270-0255
DOI: 10.1016/0270-0255(87)90636-1