ω Precipitation in a Beta Metastable Titanium Alloy, Resistometric Study
نویسندگان
چکیده
منابع مشابه
Fatigue properties of a metastable beta-type titanium alloy with reversible phase transformation.
Due to recent concern about allergic and toxic effects of Ni ions released from TiNi alloy into human body, much attention has been focused on the development of new Ni-free, metastable beta-type biomedical titanium alloys with a reversible phase transformation between the beta phase and the alpha'' martensite. This study investigates the effect of the stress-induced alpha'' martensite on the m...
متن کاملA Study of Fatigue Crack Initiation in a Two Phase Β-metastable Titanium Alloy
α/β titanium alloys are choice materials for aeronautical and automotive industries due to their high performance to density ratio. For several applications, fatigue resistance is one of the critical design parameter. Particularly, initiation of fatigue crack plays a key role. Furthermore, hardly anything can be found in the literature on the fatigue crack initiation in multiphase microstructur...
متن کاملIn situ TEM study of dislocation slip in a metastable titanium alloy
Dislocation slip is investigated in a metastable titanium alloy with the Ti-23Nb-0.7Ta-2Zr0.4Si composition (at. %) by in situ straining experiments in a transmission electron microscope (TEM). Moving dislocations have a/2<111> Burgers vectors and glide in {110}, {112} or {123} planes. The mobility of screw dislocations is lowered by punctual defects and the existence of a stable and sessile ...
متن کاملMechanical Properties and Corrosion Behavior of a Beta Titanium Alloy
Recently, people devote to the development of beta titanium alloys which have better biocompatibility because of the addition of Mo, Nb, Ta, Zr, Sn, et al. In this paper, the effects of heat treatment and cold roll deformation on the mechanical properties of the Ti-11.3Mo-6.6Zr-4.3Sn alloy (TMZS) are investigated by tensile test. The results show that the excellent combination of strength and d...
متن کاملThe Dependence of Isothermal ω Precipitation on the Quenching Rate in a Metastable β-Ti Alloy
The precipitation behavior of the α strengthening phase in metastable β-Ti alloys is highly dependent on heat treatment parameters such as quenching rate, heating rate and ageing temperature. In this paper we have investigated the influence of quenching rate on the formation of isothermal ω precipitates that have been regarded as potent nucleant sites for α precipitation. The results show that ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Transactions, JIM
سال: 2000
ISSN: 0916-1821,2432-471X
DOI: 10.2320/matertrans1989.41.1092