Oil Well Breakdown Pressure in Blasting Force Loading Condition
نویسندگان
چکیده
منابع مشابه
The Breakdown Voltage of Insulation Oil under the Influences of Humidity, Acidity, Particles and Pressure
The breakdown voltage of mineral insulation oil was systematically investigated under the influences of moisture, acidity, pressure and particles. The standards IEC156/95 (VDE0370/Part5/96 and ASTM D1816) specified the test conditions. Moisture provides charge carriers, therefore a moisture saturation of 0 to 20 % decreases the breakdown voltage from 72 down to 61 kV. Acids as aging products de...
متن کاملContact Pressure Validation of Steam Turbine Casing for Static Loading Condition
Steam Turbines are devices used to convert thermal energy of steam into mechanical energy, which may be used to produce Electrical Energy. Steam turbine generator units are being used extensively all over the world for generation of electric power and for co-generation of steam and power. Contact pressure and pretension in bolts-analysis has been made easier in recent years due to the availabil...
متن کاملSoldiers and Oil Well Smoke
have to be considered. The first, which has been developed in the preceding section, is that passive smoking could act to disclose an asthmatic state that was so far asymptomatic. The second issue lies in the natural history of asthma. Following Martinez et al.’s publications, it has become obvious that transient wheezing could occur in non-atopic infants exposed to passive smoking. Because the...
متن کاملApplications of CBR in oil well drilling
This overview of different applications of CBR in petroleum engineering is based on a survey and comparative evaluation of different successful applications of CBR. The number of papers and research groups is indicative of importance, need, and growth of CBR in different industries. Application-oriented research in the area of case based reasoning has moved mature research results into practica...
متن کاملBreakdown characteristics of high pressure xenon lamps
An investigation of the breakdown of high intensity discharge (HID) lamps filled with xenon at pressures from 0.1 to 5 bar is presented. Three power supplies were used in order to provide voltage rates of increase covering about four orders of magnitude from 5 mV ns−1 to 100 V ns−1, the latter being typical for electronic ballasts driving commercial HID lamps. Customized lamps ensure a volume b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Asian Journal of Chemistry
سال: 2014
ISSN: 0970-7077,0975-427X
DOI: 10.14233/ajchem.2014.18156