Oil viscosity effects on lubricant oil film behaviour under minimum quantity lubrication
نویسندگان
چکیده
منابع مشابه
Influence of Magnesium Stearate as Lubricant Additive on Fretting Wear under Oil Lubrication
INTRODUCTION There is concern regarding the fretting wear of rolling bearings used in various types of machines, especially those that oscillate minutely. Because fretting wear results in the deterioration of the acoustic properties of bearings, rise in the bearing torque, and flaking originating from wear scar, fretting wear has a negative impact on the performance of rolling bearings. Maruyam...
متن کاملRelationship between Supplied Oil Flow Rates and Oil Film Thicknesses under Starved Elastohydrodynamic Lubrication
Many studies have already considered starved lubrication. However, there have been no reports on the oil film thicknesses under steady starved EHL (elastohydrodynamic lubrication), where the ultra-low volume of oil supplied per unit time is uniform. The present study examined the relationship between the supplied oil flow rate and oil film thickness under steady starved lubrication. A ball-on-d...
متن کاملEngine Lubrication Oil Aeration
The lubrication system of an internal combustion engine serves many purposes. It lubricates moving parts, cools the engine, removes impurities, supports loads, and minimizes friction. The entrapment of air in the lubricating oil is called oil aeration. Oil aeration can be detrimental to internal combustion (IC) engines. This study attempts to determine a means to reduce the level of aeration in...
متن کاملEffect of Wax Content in Hydrocracker Unconverted Oil on Viscosity Index and Yield of Lubricant Base Oil 150N
Hydroprocessing has become the main technology for the production of API Group II and III base oils. One of the key properties is viscosity index for Group II and III base oils. The effect of wax content in hydrocracker unconverted oil on viscosity index and yield was studied in a 400 kton/year hydroisomerization dewaxing plant at a total pressure of 15 MPa, a feed rate of 38 ton/hour, and a ga...
متن کاملEvaluation and Comparison of Lubricant Properties in Minimum Quantity Lubrication Machining
& Minimum Quantity Lubrication (MQL) machining involves the application of a minute amount of an oil-based lubricant to the machining process in an attempt to replace the conventional flood coolant system. Understanding the correlations between fluid properties and MQL performance can help in selecting lubricants from a variety of choices without going through extensive machining tests. This st...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2021
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/1092/1/012029