Obtaining Urea from Effluents of Gold Cyanidation Process

Copper and Cyanide Recovery in Cyanidation Effluents

Cyanidation is the main process for gold and silver recovery from its ores. In this study, a process is proposed to recover copper and cyanide from barren solutions from the Merrill-Crowe cementation process with zinc dust. This technology is based on inducing nucleated precipitation of copper and silver in a serpentine reactor, using sodium sulfide as the precipitator, and sulfuric acid for pH...

Electrooxidation as a Pretreatment Process Before Cyanidation

a study on the design of bio-ethanol process from date wastes of sistan and baluchistan province

اتانول کاربردهای متنوعی در صنایع لاستیک سازی، رنگسازی، حلالها ومکمل سوخت خودرو دارد. اتانول برخلاف نفت از جمله مواد تجدیدپذیر محسوب می شود که مشکلات زیست محیطی و آلودگی نیز ایجاد نمی کند. استفاده از اتانول به عنوان مکمل سوختخودروها از جمله مهمترین مصارف صنعتی این ماده بشمار می رود. با توجه به این موضوع تحقیق و توسعه در زمینه تولید اتانول با درجه خلوص بالا در سطح جهان، و نه تنها در کشور های پیشر...

Optimization of cyanidation parameters to increase the capacity of Aghdarre gold mill

This study investigates the optimization of gold dissolution from Aghdarre ore. Therefore, a laboratory investigation was initiated, to improve the leaching conditions with the objective of maximizing mill capacity with no reduction on gold recovery. It was observed that the time reduction from 25 to 15 hours did not change the gold recovery. In the other words, it indicated that a capacity of ...

Evaluation of the Cyanidation Leaching of Gold in a Waste Rock Ore

Samples of the waste rock obtained from Marofengin South Africa ground 60, 70 and 80% passing 75µm were leached with cyanide in bottle roll tests. The results obtained showed that the percentage gold dissolution depends more on the ore size consists than on the cyanide concentration with the highest average dissolution rates of 88.75, 94.34 and 95.90% found at 600, 500 and 500 ppm, for 60, ...