Observation of Tritium Distribution in Low-Activation V-4Cr-4Ti Alloy by Radioluminography

Environmental effects on irradiation creep behavior of highly purified V-4Cr-4Ti alloys (NIFS-Heats) irradiated by neutrons

Effect of Chromium Content on Mechanical Properties of V-xCr-4Ti-0.15Y Alloys

A combined effect of purification and yttrium (Y) addition was investigated to improve impact properties of high-chromium V-xCr-4Ti alloys. Tensile tests and Charpy impact tests were carried out by using miniaturized specimens. V-10Cr-4Ti-0.15Y alloy had ultimate tensile stress (UTS) at 700 oC and yield stress (YS) approximately equal to and higher than those of V-4Cr-4Ti alloy, respectively. V...

Metallographic Observation to Determine a Low-content Gold Alloy Castability

Low gold-content dental alloys nowadays represent viable alternatives to high nobility alloys. The casting techniques and equipment used for low-gold content alloys are similar to those used for conventional gold alloys. This, coupled with their acceptable properties, good clinical performance and lower cost, has lead to their widespread use. The alloy performance in the dental laboratory is an...

‏‎suppression of coke formation in thermal cracking by coke inhibitors‎‏

‏‎the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...

Effect of Cooling Rate on Morphology of TiAl3 Particles in Al–4Ti Master Alloy

The Al-4Ti master alloy was fabricated by aluminum (Al) and sponge titanium particle in a resistance furnace at different cooling rates. This work aims to investigate the relationship between the cooling rate and morphology of TiAl3. The microstructure and composition of master alloys at different cooling rates were characterized and analyzed by optical microscopy (OM), X-ray diffraction (XRD),...