Observation of Rising Particle Velocity Profile of Shock Wave Front in 6061-T6 Aluminum
نویسندگان
چکیده
منابع مشابه
Two-dimensional Mapping of Residual Strains in 6061-t6 Aluminum Alloy Friction Stir Welds
The residual strain profiles were measured through the thickness of friction-stir welded (FSW) plates using neutron diffraction to study the relationship between the angular distortion and the residual strain distribution. Three different weld specimens were prepared from a 6061-T6 aluminum alloy with the purpose of separating the effects of the frictional heat and plastic deformation on the re...
متن کاملHigh Pressure Shock Wave Attenuation
The attenuation of high pressure shock waves has been investigated. High purity copper, 6061-T6 aluminum, 6A1-4V and a phase titanium, an uranium alloy and two alloys of beryllium were examined experimentally at pressures as high as 3 megabars. Low pressure experiments were instrumented with a velocity laser interferometer. Intermediate pressures (to several hundred kilobars) were instrumented ...
متن کاملeffect of sub-grid scales on large eddy simulation of particle deposition in a turbulent channel flow
چکیده ندارد.
15 صفحه اولMicrostructure and Mechanical Properties of Dissimilar Friction Stir Welding between Ultrafine Grained 1050 and 6061-T6 Aluminum Alloys
The ultrafine grained (UFGed) 1050 Al plates with a thickness of 2 mm, which were produced by the accumulative roll bonding technique after five cycles, were friction stir butt welded to 2 mm thick 6061-T6 Al alloy plates at a different revolutionary pitch that varied from 0.5 to 1.25 mm/rev. In the stir zone, the initial nano-sized lamellar structure of the UFGed 1050 Al alloy plate transforme...
متن کاملEffect of Processing on Inelastic Fracture Behavior of 6061 Aluminum
Statistical concepts from Design of Experiments were used to study the effect of thermal processing on the mechanical properties of 6061 aluminum. The soak temperature, cooling rate and soak temperature/cooling rate interaction term were found to be the most influential processing variables. Soak time and heating rate were statistically insignificant in the current experimental design, but modi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Visualization Society of Japan
سال: 2002
ISSN: 1884-037X,0916-4731
DOI: 10.3154/jvs.22.1supplement_417