nvestigation of Morphology of Ti-6Al-7Nb after sulphuric anodizing
نویسندگان
چکیده
منابع مشابه
Comparison among Mechanical Properties of Investment-Cast c.p. Ti, Ti-6Al-7Nb and Ti-15Mo-1Bi Alloys
The present study compares castability and mechanical performance among alloys of c.p. Ti, Ti-6Al-7Nb and a newly-developed Ti-15Mo-1Bi in regard to their as-cast state. Experimental results indicate that average cast length of Ti-6Al-7Nb appears a little lower than c.p. Ti and Ti-15Mo-1Bi, although the differences are not significant. C.p. Ti has an hcp phase of lath-type morphology with serra...
متن کاملThe effects of a SiO2 coating on the corrosion parameters cpTi and Ti-6Al-7Nb alloy
The aim of this paper was to evaluate the usefulness of the sol-gel method application, to modificate the surface of the Ti6Al7Nb alloy and the cpTi titanium (Grade 4) with SiO2 oxide, applied on the vascular implants to improve their hemocompatibility. Mechanical treatment was followed by film deposition on surface of the titanium samples. An appropriate selection of the process parameters was...
متن کاملMechanical properties and microstructural evolution of vacuum hot-pressed titanium and Ti-6Al-7Nb alloy.
Hot-pressing is a powder metallurgy process where loose powder is loaded into a mould, usually of graphite, and sintered by the simultaneous application of high temperature and pressure. In this study elemental titanium and Ti-6Al-7Nb alloy powders are hot-pressed under different conditions in order to study the influence of the processing parameters on the microstructure and mechanical propert...
متن کاملBonding properties of heat-polymerized denture base resin to Ti-6Al-7Nb alloy.
The purpose of this study was to evaluate the shear bonding strength and leakage of heat-polymerized denture base resin to titanium-aluminum-niobium (Ti-6Al-7Nb) and cobalt-chromium (Co-Cr) castings using four adhesive systems; three adhesive primers (Metal Primer II, Metal Link, MR. Bond) and one heat-polymerized adhesive resin containing 4-META (Metadent). The resin tab was heat-polymerized d...
متن کاملHuman osteoblast-like cell spreading and proliferation on Ti-6Al-7Nb surfaces of varying roughness.
There have been a number of attempts to modify the surface of dental implants to improve osseointegration. These modifications include alterations of surface chemistry and roughness. The purpose of this study was to examine the early response of human osteoblast-like cells placed on Ti-6Al-7Nb disks that had a similar grooved surface topography and three different levels of surface roughness (R...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Maritime & Transportation Science
سال: 2017
ISSN: 1848-9052,0554-6397
DOI: 10.18048/5306