Nutty Carbon: Morphology Replicating Hard Carbon from Walnut Shell for Na Ion Battery Anode
نویسندگان
چکیده
منابع مشابه
Synthesis of Hard Carbon- Silicon Nanocomposite as Anode Active Material for Lithium-Ion Batteries
In this research, using phenolic resin as the precursor of carbon and various amounts of ethylene glycol as a pore former, porous samples of hard carbon were synthesized. Samples were characterized by x-ray diffraction (XRD) and N2 adsorption-desorption methods. Broad diffraction peaks represent the amorphous structure of samples. Moreover, the gas adsorption-desorption curves showed that the a...
متن کاملPreparation of Carbon Molecular Sieves from Pistachio Shell and Walnut Shell for Kinetic Separation of Carbon Monoxide, Hydrogen, and Methane
In this study, two Carbon Molecular Sieves using Pistachio shell (CMS P) and Walnut shell (CMS W) were prepared by a chemical vapor deposition method and used for pressure swing adsorption and separation of CO/H2 and CO/CH4. Adsorption isotherms of gases obtained for both CMS’s. The Dubinin-Radushkevich isotherm model was used for comparing pore volum...
متن کاملSnO2 coated carbon cloth with surface modification as Na-ion battery anode
Department of Electrical Engineering, University of Southern California, Los Angeles, CA 90089, United States Department of Chemical Engineering and Material Science, University of Southern California, Los Angeles, CA 90089, United States Department of Electrical Engineering, University of California at Los Angeles, Los Angeles, CA 90095, United States King Abdulaziz City for Science and Techno...
متن کاملCarbon coated hollow Na2FePO4F spheres for Na-ion battery cathodes
Carbon coated porous hollow Na2FePO4F (C/Na2FePO4F) spheres with 500 nm diameter and 80 nm wall thickness are synthesized by a one-step template-free ultrasonic spray pyrolysis process using sucrose as the carbon source. Nano-sized porous hollow C/Na2FePO4F spheres allow electrolyte to penetrate into the hollow structure, and thus the electrochemical reaction can take place on both the outside ...
متن کاملMicroporous carbon coated silicon core/shell nanocomposite via in situ polymerization for advanced Li-ion battery anode material.
A microporous carbon coated core/shell Si@C nanocomposite prepared by in situ polymerization exhibits a stable capacity of over 1200 mAh g(-1) with 95.6% retention even after 40 cycles, which makes it a promising anode material for lithium ion batteries.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ACS Omega
سال: 2017
ISSN: 2470-1343,2470-1343
DOI: 10.1021/acsomega.7b00633