Numerical Study of Residual Thermal Stresses in MMC
نویسندگان
چکیده
منابع مشابه
Numerical Study on Residual Thermal Stresses in Carbon Fibre Pullout
This paper investigated the effect of residual thermal stresses on carbon fibre pullout by using cohesive zone modelling. The finite element method was applied to analyse the residual thermal stress components along the interface between the fibre and matrix due to curing. A comparison study on the anisotropic and isotropic material properties are considered using four typical carbon fibres, T3...
متن کاملNumerical Analysis of explosion effects on the redistribution of residual stresses in the underwater welded pipe
Structural health monitoring of cracked structures is one of beloved subject of researchers recently. Consider of crack behavior in the water and energy pipeline is important because of environmental problems. In this paper consider of crack parameters in the underwater pipe subjected to mechanical transient load is investigated. For this purpose, three- dimensional parametric model of cracked ...
متن کاملThermal gradients and residual stresses in veneered Y-TZP frameworks.
OBJECTIVES The occurrence of "chipping" of all-ceramic restorations with Y-TZP frameworks has resulted in various designs and cooling procedures recommended for reducing such behavior. In this paper the temperature gradients during fast and slow cooling for conventional and anatomical designs are compared as well as an optical procedure to directly compare the influence of cooling rate on resid...
متن کاملFracture Mechanics of Composites with Residual Thermal Stresses
The problem of calculating the energy release rate for crack growth in an arbitrary composite in the presence of residual stresses is considered. First, a general expression is given for arbitrary, mixed traction and displacement boundary conditions. This general result is then applied to a series of specific problems including statistically homogeneous composites under traction or displacement...
متن کاملexperimental and numerical study of through thickness residual stresses distribution in sheet metals produced by ecar
abstract: the equal channel angular rolling (ecar) is one of the severe plastic deformation processes, which can develop a shear deformation into a sheet metal. in this process, internal stresses are created due to the different strain levels experienced in different locations at the same time. the incremental hole drilling method is an effective technique for the evaluation of the through-thic...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mechanics and Mechanical Engineering
سال: 2018
ISSN: 2354-0192
DOI: 10.2478/mme-2018-0086