Numerical study of molten metal melt pool behaviour during conduction-mode laser spot melting
نویسندگان
چکیده
منابع مشابه
Study and Modelling of the Melt Pool Dynamics during Selective Laser Sintering and Melting
Selective Laser Sintering (SLS) and Selective Laser Melting (SLM) are parent layer manufacturing processes that allow generating complex 3D parts by consolidating layers of powder material on top of each other. Consolidation is obtained by processing the selected areas using the thermal energy supplied by a focused laser beam. In SLS partial fusion of powder particles takes place, followed by a...
متن کاملOnline Melt Pool Temperature Control for Laser Metal Deposition Processes
Melt pool temperature is of great importance to deposition quality in Laser Metal Deposition processes. To control the melt pool temperature, an empirical process model describing the relationship between the temperature and process parameters (i.e., laser power, powder flow rate, and traverse speed) is established and verified experimentally. A general tracking controller using the Internal Mo...
متن کاملNumerical Simulation Of Heat Affected Zone Microstructure During Laser Surface Melting
Microstructural changes during laser welding and laser surface treatment has been regarded by many researchers. Most researches have focused on studying the effect of various process parameters on the size and microstructure of the heat affected zone. But some studies show that the initial microstructure of the base metal can also affect the heat affected zone dimensions and final microstructur...
متن کاملEffects of Melt Pool Variables and Process Parameters in Laser Direct Metal Deposition of Aerospace Alloys
Despite considerable advances in of laser direct metal deposition (LDMD) process optimization, there is rather limited work reported on the effects of melt pool variables on the final deposit characteristics. This article considers the effects of process parameters and melt pool characteristics on the deposition of Inconel 718 powder on a Ti-6Al-4V thin wall. A 1.5kW diode laser and LDMD system...
متن کاملInvestigation on Selective Laser Melting AlSi10Mg Cellular Lattice Strut: Molten Pool Morphology, Surface Roughness and Dimensional Accuracy
AlSi10Mg inclined struts with angle of 45° were fabricated by selective laser melting (SLM) using different scanning speed and hatch spacing to gain insight into the evolution of the molten pool morphology, surface roughness, and dimensional accuracy. The results show that the average width and depth of the molten pool, the lower surface roughness and dimensional deviation decrease with the inc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics D: Applied Physics
سال: 2020
ISSN: 0022-3727,1361-6463
DOI: 10.1088/1361-6463/abca62