Numerical study of hard-metal powder compaction
نویسندگان
چکیده
منابع مشابه
Experimental Investigation of Metal Powder Compaction without Using Lubricant
The main objective of this work was to design a novel device for compaction of metal powders so that the green parts could be ejected with applying a negligible force and without the need for any lubricant in either an admixed form or applied to the die wall. For this purpose a 40 mm diameter one-piece die was envisaged which would elastically contracted 0.076 mm before compaction and after com...
متن کاملNumerical Simulation on Pharmaceutical Powder Compaction
In this paper, we present a modified density-dependent Drucker-Prager Cap (DPC) model with a nonlinear elasticity law developed to describe the compaction behavior of pharmaceutical powders. The model is implemented in ABAQUS with a user subroutine. Using microcrystalline cellulose (MCC) Avicel PH101 as an example, the modified DPC model is calibrated and used for finite element simulations of ...
متن کاملNumerical Methods for Predicting Roll Press Powder Compaction Parameters
Large numbers of cohesive powders are compacted using a roll press. The principle of compaction is that particulate materials become a compact when they are subjected to high pressure. Experimental work was carried out on pharmaceutical powders [1] to determine the influence of operating parameters on the roll process compaction. Theses parameters are determined for a given powder and must be m...
متن کاملNumerical study of soil dynamic compaction using ABAQUS model
One of the most important methods of soil compaction is dynamic compaction, which is one of the oldest and economical methods of soil improvement up to great depths. This method is applied due to its many benefits, including its economic procedure to correct many kinds of soil. One of the most important issues that affect soil improvement methods is being economic. The three main method...
متن کاملStudy of Compaction and Ejection Properties of Powder Mixes Processed by Warm Compaction
Warm compaction takes advantage of temperature to favor densification during compaction. However, this technique requires powder mixes with specific physical characteristics to be adequately processed in the temperature range involved in warm pressing. The mix formulation, especially the lubricant/binder system, should provide good flowability and compressibility and lubrication of the die wall...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2021
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/1093/1/012002