Numerical Simulations of Reactive Material Double-Layered Liner Shaped Charge Penetrating Steel Target

نویسندگان

چکیده

Abstract The jet formation and penetration behaviors of shaped charge with a reactive material double-layered liner (RM-DLL) are presented in this paper based on the AUTODYN-2D code. Numerical results show that wall thickness ratio RM-liner to metal has significant influence characteristics composite jet. As increases, tip velocity jet, pressure RM-liner, temperature RM-elements decrease. effect performance RM-DLL charges against steel targets significantly depends RM-initiation delay time ( τ ). depth (PD) titanium into target is limited. In case RM-tungsten liner, RM-mass following crater very small. RM-copper capability well matched mass follow-thru RMs. Compared PD, standoff more impact entering hole.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

بررسی تحلیلی و عددی ضخامت آستری خرج گود

One application of energetic materials in the military is shaped charged warhead. The most important application of this type of warheads is penetration into target. For this purpose, several factors influence the design of shaped charge. Liner thickness is one of most effective factors in the design of shaped charge, which has a significant role in jet Velocity and depth of penetration in targ...

متن کامل

تحلیل تجربی و عددی نفوذ سرجنگی پیشرو پرتابه های دو مرحله ای در اهداف بتنی محدود

In this paper, the penetration process of the follow warhead in anti structure tandem projectiles is investigated by numerical and experimental methods. These projectiles are usually shaped charge or EFP. In the follow projectile, geometry and material are considered as the two main parameters. Numerical modeling of the problem has been performed in AUTODYN code. The numerical results have ...

متن کامل

Numerical simulations of negative-index refraction in wedge-shaped metamaterials.

A wedge-shaped structure made of split-ring resonators (SRR) and wires is numerically simulated to evaluate its refraction behavior. Four frequency bands, namely, the stop band, left-handed band, ultralow-index band, and positive-index band, are distinguished according to the refracted field distributions. Negative phase velocity inside the wedge is demonstrated in the left-handed band and the ...

متن کامل

Numerical simulations of wave breakings around a wedge- shaped bow

Flows around a wedge-shaped bow are simulated with the aim of investigating the wave breaking mechanism and small scale features of ship bow waves. The wedge geometry used in the experimental study of Waniewski et al. (2002) is chosen with the flow conditions at Re = 1.64×10 5 and Fr = 2.93. The bow wave structure, wave breaking process and air entrainment are studied. The predicted overall bow...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of physics

سال: 2023

ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']

DOI: https://doi.org/10.1088/1742-6596/2460/1/012120