Numerical Simulations and Experiments on Single-Tooth Rock-Breaking

Numerical Simulations of Laboratory Experiments for Determining the Post-yielding Mechanical Parameters of Soil and Rock

ABSTRACT: The mechanical parameters of constitutive equations for soil and rock can be determined by laboratory experiments in which a cylindrical specimen is commonly tested under uniaxial and triaxial compressive conditions. The distribution of stress in the specimen during the tests must be kept uniform and homogeneous. In this paper, numerical simulations are carried out to determine the di...

Numerical simulations and cutting experiments on single point diamond machining of semiconductors and ceramics

This chapter presents numerical simulation work and single-point nano-machining experiments conducted on semiconductor and ceramic materials, e.g. silicon (Si) and silicon carbide (SiC). The apparent ductile mode material removal mechanism observed in these materials is believed to be the result of a high pressure phase transformation (HPPT), which generates a small Correspondence/Reprint reque...

numerical simulations of spilling breaking waves

Comparison between Numerical Simulations and Experiments for Single Point Diamond Turning of Silicon Carbide

Single Point Diamond Turning (SPDT) experiments conducted on single crystal 6-H Silicon Carbide (SiC) has shown chip formation similar to that seen in the machining of metals. The ductile nature of SiC is believed to be the result of a high pressure phase transformation (HPPT), which generates a plastic zone of material that behaves in a metallic manner. This metallic behavior is the basis for ...

Numerical Analysis on Rock Breaking by Disc Cutters with Different Joint Characteristics

RESEARCH ARTICLE Numerical Analysis on Rock Breaking by Disc Cutters with Different Joint Characteristics Tan Qing, Yi Nian-en, Xia Yi-min, Zhang Xu-hui, Jiang Bo, Yang Yang and Yizeng Siyuan State Key Laboratory of High Performance Complex Manufacturing, Central South University, Changsha, Hunan 410083, China School of Mechanical and Electrical Engineering, Central South University, Changsha, ...