Numerical simulation of water entry of different arbitrary bow sections
نویسندگان
چکیده
منابع مشابه
Numerical Simulation of Water Entry of Different Arbitrary Bow Sections
Water impact phenomenon of general bow section is a critical event for planning hulls. In this paper, the water entry of several arbitrary bow sections is investigated. For this purpose, arbitrary bow shapes which are introduced by Lewis form approximation are considered. In order to obtain pressure distribution and free surface profile, volume of fluid (VOF) method coupled with finite volume m...
متن کاملNumerical simulation of water entry of tunnel cross section with different deadrise angles and tunnel radiuses
This study deals with the numerical modeling of symmetrical water entry of tunneled sections. In this study, firstly, the water entry problem of a wedge section without tunnel in four different deadrise angles was numerically modeled. The obtained results related to the pressure distribution on these sections and the maximum pressure have been compared with the experiment results. In the next s...
متن کاملViscous Models Comparison in Water Impact of Twin 2D Falling Wedges Simulation by Different Numerical Solvers
In this paper, symmetric water entry of twin wedges is investigated for deadrise angle of 30 degree. Three numerical simulation of a symmetric impact, considering rigid body dynamic equations of motion in two-phase flow is presented. The two-phase flow around the wedges is solved by Finite Element based on Finite Volume method (FEM-FVM) which is used in conjunction with Volume of Fluid (VOF) sc...
متن کاملNumerical Evaluation of Cushioning Pressure in Water Entry of Rigid Bodies
Effect of air cushion layer right before impact of a rigid body onto water surface has been investigated in this paper. The study is mainly focused on evaluation of cushioning pressure and the resulting free surface elevation. The air flow is assumed to be an irrotational flow which is governed by Laplace equation. The air problem and the resulting response of the water free surface are suppose...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Naval Architecture and Marine Engineering
سال: 2014
ISSN: 2070-8998,1813-8535
DOI: 10.3329/jname.v11i2.18724