Numerical simulation of thermal and hydraulic performance of a micro plate-pin fin heat sink
نویسندگان
چکیده
منابع مشابه
Thermal Performance of an Elliptical Pin Fin Heat Sink
Christopher L. Chapman, and Seri Lee Aavid Engineering, Inc. Laconia, New Hampshire 03247 Bill L. Schmidt Silicon Graphics Computer Systems Mountainview, California 94039 Comparative thermal tests have been carried out using aluminum heat sinks made with extruded fin, cross-cut rectangular pins, and elliptical shaped pins in low air flow environments. The elliptical pin heat sink was designed t...
متن کاملNumerical Optimization of Pin-Fin Heat Sink with Forced Cooling
This study presents the numerical simulation of optimum pin-fin heat sink with air impinging cooling by using Taguchi method. 9 L ( 4 3 ) orthogonal array is selected as a plan for the four design-parameters with three levels. The governing equations are discretized by using the control-volume-based-finite-difference method with a power-law scheme on the non-uniform staggered grid. We solved th...
متن کاملFlow boiling of water in a circular staggered micro-pin fin heat sink
Flow boiling of water across a bank of circular staggered micro-pin fins, 250 lm long and 100 lm diameter with pitch-to-diameter ratio of 1.5, was experimentally studied for mass fluxes ranging from 346 kg/m s to 794 kg/m s and surface heat fluxes ranging from 20 W/cm to 350 W/cm. Local temperature measurements were used to elucidate the two-phase heat transfer coefficients. The flow was visual...
متن کاملEffect of Using Nano Encapsulated Phase Change Material on Thermal Performance of Micro Heat Sink
The aim of this paper is to enhance thermal performance of a microchannel heat sink by using nanoencapsulated phase change material (NEPCM) slurry as a cooling fluid instead of pure fluid. A threedimensional model of a circular channel using water slurry of NEPCM was developed. The results show a significant reduction in the mean fluid temperature along the channel and heat sink wall temperatu...
متن کاملStudy on Thermal and Hydrodynamic Indexes of a Nanofluid Flow in a Micro Heat Sink
The paper numerically presents laminar forced convection of a nanofluid flowing in a duct at microscale. Results were compared with both analytical and experimental data and observed good concordance with previous studies available in the literature. Influences of Brinkman and Reynolds number on thermal and hydrodynamic indexes have been investigated. For a given nanofluid, no change in efficie...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Heat and Technology
سال: 2018
ISSN: 0392-8764
DOI: 10.18280/ijht.360315