Numerical Simulation of Temperature and Flow Field in Horizontal Continuous Annealing Furnace
نویسندگان
چکیده
منابع مشابه
Simulation of Temperature Distribution in a Continuous Tunnel Reheat Furnace Using the Monte Carlo Method
A mathematical model of a continuous reheating furnace has been developed to identify the design and operating parameters that significantly affect furnace performance. In this study, the furnace is modeled 3 dimensionally and theMonte Carlomethod is used to find the overall absorption factor. The overall absorption factor is then used to calculate the energy balance for furnace walls, the gas,...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Three-dimensional numerical simulation of temperature and flow fields in a Czochralski growth of germanium
For a Czochralski growth of Ge crystal, thermal fields have been analysed numerically using the three-dimensional finite volume method (FLUENT package). The arrangement used in a real Czochralski crystal growth lab included a graphite crucible, heat shield, heating device, thermal insulation and chamber including two gas outlets. We have considered two cases for calculations, which are configur...
متن کاملNumerical simulation of in-cylinder tumble flow field measurements and comparison to experimental results
This paper presents a comparison between measured and predicted results of the in-cylinder tumble flow and the flow coefficient generated by a port-valve-liner assembly on a steady-flow test bench. In this study, computational fluid dynamics (CFD) methods were employed to gain further insight into characteristics of an engine. The purpose was to advance understanding of the stationary turbulenc...
متن کاملSimulation of local scour caused by submerged horizontal jets with Flow-3D numerical model
One of the most concerning issues for researchers is to predict the shape and dimensions of the scour pit nearhydraulic structures such as the base of bridges, weirs, valves and stilling basins due to both financial and humanhazards induced by destruction of the structure. As the scour issue has its own complexity in relation to themultiplicity of effecting factors on it, in this study therefor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Research Journal of Applied Sciences, Engineering and Technology
سال: 2013
ISSN: 2040-7459,2040-7467
DOI: 10.19026/rjaset.6.3951