Numerical simulation of supersonic film cooling in a rearward-facing slot
نویسندگان
چکیده
منابع مشابه
Numerical Simulation of Laminar Film Cooling in a Supersonic Boundary Layer using Modeled and Simulated Blowing
Direct numerical simulations are used to investigate the method of film cooling in a laminar flat-plate Mach-2.67 boundary layer. Air is employed as mean-flow and coolant gas and is injected into an adiabatic or isothermal boundary layer through one or two rows of staggered, discrete holes. Previous simulations were performed using a modeled blowing approach, where the mass flux and temperature...
متن کاملExperimental Investigation into the Hydrodynamics Effects of Slot Film Cooling on a Cylindrical Model
An experimental study of hydrodynamics of film cooling is performed by using a single longitudinal slot on a cylindrical model simulated to the leading edge of the gas turbine blade. The model is set up into the test section of an open-circuit induced flow wind tunnel which provides the main flow. The injected air, as a secondary film flow, produced from a high pressure compressor is considered...
متن کاملNumerical Simulation Of the Componend Angles Effects On Adiabatic Film Cooling Effectiveness
Abstract Film Cooling Adiabatic Effectiveness on a Profile of a Gas Turbine blade that Using Holes with 45 Degree Combined Angles to the Flow Direction and Radial Along the Attack Edge as well as 25 Degree Angles to the Flow Direction and Surface Area of the Attack Edge Area and 35 degrees relative to the outlet hole suefaces along stagnation line, Under a specified blowing ratios, using the Re...
متن کاملThe numerical simulation of turbulent boundary layers and film cooling
A new finite volume algorithm has been developed to solve a variety of flows by using large eddy simulation and direct numerical simulation. This finite volume algorithm was developed using a dual time stepping approach with a preconditioning technique and a new factorization implementation. The method takes the advantage of pressure-based and density-based meth ods. Thus, it provides an effic...
متن کاملLarge-Eddy Simulation of Supersonic Film Cooling at Finite Pressure Gradients
Large-eddy simulations are performed to analyze film cooling in supersonic combustion ramjets (Scramjets). The transonic film cooling flow is injected through a slot parallel to a Ma = 2.44 main stream with a fully turbulent boundary layer. The injection Mach number is Mai = 1.2 and adiabatic wall conditions are imposed. The cooling effectiveness is investigated for adverse and favorable pressu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Mechanical Engineering
سال: 2017
ISSN: 1687-8140,1687-8140
DOI: 10.1177/1687814017748014