Numerical Simulation of Internal Loop Reactor for Heavy Oil Slurry Bed Hydroprocessing
نویسندگان
چکیده
منابع مشابه
Numerical modelling and simulation of liquid-impelled loop reactor
A liquid-impelled reactor (LLR) system was modelled using macro-and micro-balance technique. The relative goodness of using macro-balance was evaluated by comparing its solutions with the results obtained using micro-balance modell. The micro-balance modell formulated was used to investigate the dynamic behaviour of the system and to crosscheck the effectiveness of macro-balance modell. A numer...
متن کاملImproved numerical simulation of the low temperature Fischer-Tropsch synthesis in a trickle bed reactor
Abstract Gas to liquid (GTL) process involves heterogeneous catalytic chemical reactions that convert synthesis gas to hydrocarbons and water vapor. A three phase reactor, called Low temperature Fischer-Tropsch (LTFT) is commonly applied for GTL process. In this reactor the gaseous phase includes the synthesis gas, light hydrocarbons and water vapor, the liquid phase is a mixture of the h...
متن کاملUsing Chemistry-oriented Lumping to Model Heavy Oil Hydroprocessing
Building on the principles of structure-oriented lumping (SOL), chemistry-oriented lumping methods have been developed to describe the composition in tandem with the hydro-processing chemistry of heavy oils such as vacuum residue, de-asphalted oil, tar and bitumen. Recent advances in analytical chemistry have provided the necessary fundamental insights that are required to develop such models. ...
متن کاملInvestigation of Surfactant Effect on the Operational Characteristics of a Packed Bed Internal Loop Airlift Reactor
Investigation of turbulency on the rate of induced liquid circulation, gas hold-up, mixing time and overall gas–liquid volumetric oxygen mass transfer coefficient. The various types of surfactants (containing Brij58, TritonX-405, Tween40, HCTBr) with various concentrations of 1-5 ppm were examined on the operational characteristics of the reactor. In surfactant solutions (in comparison with pur...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Open Fuels & Energy Science Journal
سال: 2014
ISSN: 1876-973X
DOI: 10.2174/1876973x01407010047