Numerical simulation of grinding induced phase transformation and residual stresses in AISI-52100 steel
نویسندگان
چکیده
منابع مشابه
PHASE TRANSFORMATION DURING WEAR OF AISI STAINLESS STEEL 316
Abstract: Austenitic stainless steels exhibit a low hardness and weak tribological properties. The wear behaviour of austenitic stainless steel AISI 316 was evaluated through the pin on disc tribological method. For investigating the effect of wear on the changes in microstructure and resistance to wear, optical microscopy and scanning electron microscope were used. The hardness of the worn...
متن کاملNumerical simulation of transient temperature and residual stresses in friction stir welding of 304L stainless steel
Three-dimensional nonlinear thermal and thermo-mechanical numerical simulations are conducted for the friction stir welding (FSW) of 304L stainless steel. The finite element analysis code—WELDSIM, developed by the authors specifically for welding simulation, was used. Two welding cases with tool rotational speeds of 300 and 500 rpm are analyzed. The objective is to study the variation of transi...
متن کاملApplied mechanics in grinding—VI. Residual stresses and surface hardening by coupled thermo-plasticity and phase transformation
The present study aims to investigate the residual stresses and surface hardening in ground components caused by the coupled effect of thermo-plasticity and phase transformation. A feasible numerical method was developed to accommodate appropriately the phase transformation in a workpiece experiencing critical temperature variation during grinding. The change of material properties was modelled...
متن کاملFast in Situ X-ray Diffraction Analysis during Quenching of a Ball Bearing Steel
This paper presents the results of time and temperature resolved analysis of changes in phase composition and stresses/residual stresses during quenching and martensitic transformation of steel. Sample temperatures up to 900°C were reached with a specially-designed furnace, in which fast cooling of sample is executed by gas quenching. Stress development during quenching followed the expected tr...
متن کاملPreparation and Mechanical Properties of Nano/Ultrafine Bainitic Structure in AISI 52100 Steel
The development of nano/ultrafine bainitic structure in AISI 52100 steel was the goal of this study. For this purpose,the AISI 52100 the specimens were austenitized at 1050 °C for 60 min followed by low-temperature austemperingtreatment at different temperatures and times. The austempered samples were characterized using field emissionscanning electron microscopy (FESEM), X-ra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Finite Elements in Analysis and Design
سال: 2012
ISSN: 0168-874X
DOI: 10.1016/j.finel.2012.05.010