Numerical Simulation of Glass-Pressing Process.
نویسندگان
چکیده
منابع مشابه
simulation of pultrusion manufacturing process of glass/polyester composites
present research involves the complete simulation of pultrusion manufacturing process of glass/polyester composites. for that purpose, the curing process is divided to two liquid and gel-solid phases. the physical characteristics of the resin consist of specific heat, viscosity and coefficient of heat transfer changes with variations of temperature and increasing the degree of curing process (α...
متن کاملNumerical Simulation of the Investment Casting Process
Determining alloy shrinkage factors is very important for the investment casting process. Casting dimensions can be obtained from numerical simulations of heat transfer and deformation phenomena. The accuracy of the dimensional results depends on heat transfer results. In order to validate heat transfer models, temperature data were obtained during casting of aluminum alloy A356 in shell molds ...
متن کاملNumerical Simulation of Soda-Lime Silicate Glass Tempering
The paper deals with the computation of residual and transient stresses in a tempered glass plate. The modelling takes into account the viscoelastic behavior and the structural relaxation of glass. The evolution of stresses with time during the rapid cooling is computed. Simulation results are compared with experimental ones from the literature available. Levels of transient tensile stress in t...
متن کاملExperimental and Numerical Investigation of Mechanical Properties in the Ultrasonic Assisted constraint groove pressing process of copper sheets
In this study, constraint groove pressing (CGP) process and ultrasonic assisted CGP (UCGP) process were investigated on the process forces, mechanical properties of the sheet, including hardness and tensile tests and grain size. Pure copper sheets were used as samples in this research. Samples were tested both with and without ultrasonic vibrations for mechanical properties and grain size up to...
متن کاملA numerical and experimental study on tubular channel angular pressing (TCAP) process
Tubular channel angular pressing (TCAP) is a new and novel severe plastic deformation (SPD) technique suitable for fabrication of bulk nanograined tubular materials. There are several parameters in TCAP process. The present paper investigates the effects of curvature angles, deformation ratio (= maximum radius during TCAP/ initial radius) and deformation direction on the plastic deformation beh...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 1995
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.61.4157