Numerical Simulation of Deformation in Hot Runner Manifold
نویسندگان
چکیده
This study simulated the deformation of a hot runner manifold and nozzle assembly during operation, aiming to address potential leaks premature failure. Both thermal mechanical models were used simultaneously accurately capture system behavior. A simplified set boundary conditions was proposed for efficient problem-solving. Analysis simulation results revealed that posed risk catastrophic failures leaks. Deformation from melt pressure relatively small compared loading, not exceeding 12%. The provided design recommendations based on findings, guiding development systems improved reliability.
منابع مشابه
Numerical simulation of deformation of a metal foam Numerical simulation of deformation of a metal foam
Mathematical model for the description of deformation of a porous metal is constructed on the basis of generalized rheological method. In this method a new rheological element, so-called rigid contact, is used to describe the uniaxial deformation of materials with different resistance to tension and compression. Change in the resistance of a porous metal to external loads, when the collapse of ...
متن کاملNumerical Simulation of Mixing Enhancement in a Hot Supersonic Jet
Experimental observations show that the presence of small tabs on the edge of a hot, compressible jet exiting into a slower moving, colder ambient ow can increase the rate of spreading of the jet. This suggests that the rate of mixing of the jet and the ambient uid is also increased. In order to elucidate the physical mechanism responsible for the increased spreading rate a set of calculations ...
متن کاملNumerical Simulation of Pipeline Deformation Caused by Rockfall Impact
Rockfall impact is one of the fatal hazards in pipeline transportation of oil and gas. The deformation of oil and gas pipeline caused by rockfall impact was investigated using the finite element method in this paper. Pipeline deformations under radial impact, longitudinal inclined impact, transverse inclined impact, and lateral eccentric impact of spherical and cube rockfalls were discussed, re...
متن کاملDirect Numerical Simulation of Liquid Films with Large Interfacial Deformation
Liquid films are important in many industrial applications, but also from a fundamental point of view, they are important two-phase flow systems. In this paper, we develop a sharp interface/level set method for the Direct Numerical Simulation (DNS) of liquid films with large interfacial deformations, and large density ratio between the liquid and the gas phase. We use the ghost fluid method to ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Micromachines
سال: 2023
ISSN: ['2072-666X']
DOI: https://doi.org/10.3390/mi14071337