Numerical simulation of debonding of adhesively bonded joint
نویسندگان
چکیده
منابع مشابه
Numerical Simulation of Debonding Failure of Reinforced Concrete Beams Strengthened with Externally Bonded Frp
As the life age of the existing structures are required to meet the changing demands on civil infrastructures. So strengthening and retrofitting are required. Recently many techniques to strengthen the reinforced concrete beams in flexural by using fiber reinforced polymer (FRP) had appeared. The most famous technique among them is strengthening the (RC) beams with externally bonded FRP sheet t...
متن کاملPlastically-deforming, Adhesively-bonded Structures: Ii Numerical Studies
To enable the effective and reliable use of structural adhesive bonding in automotive applications, the cohesive properties of a joint need to be determined over a wide range of loading rates. In this paper, a strategy for determining these properties has been described and used to analyze a set of experimental results presented in a companion paper. In the particular system studied, a crack gr...
متن کاملEffect of Adherend Shape on Stress Concentration Reduction of Adhesively Bonded Single Lap Joint
Article history: Received: 03.10.2014. Received in revised form: 19.12.2014. Accepted: 30.12.2014. In this work, the effect of adherend shape on the tensile strength of adhesively bonded single lap aluminum structures joint was numerically studied using three dimensional finite element models. Six joint models were investigated. In this paper, a static finite element analysis was performed in A...
متن کاملAnalytical model of asymmetrical Mixed-Mode Bending test of adhesively bonded GFRP joint
This paper presents new analytical model of asymmetric mixed-mode bending (MMB) specimen of adhesively bonded pultruded GFRP joints. An easily applicable relationship for the calculation of the strain energy release rate of the asymmetric MMB specimens is proposed based on the beam theory. The model is capable to analyze stacking sequence as well as various crack propagation paths. In the paper...
متن کاملComputational Models of Adhesively Bonded Joints
Simulations using the Finite Element Method (FEM) play an increasingly important role in the design process of joints and fasteners in the aerospace industry. In order to utilize the potential of such adhesive bonding, there is an increasing need for effective and accurate computational methods. The geometry and the nature of an adhesive joint are, however, not so simple to describe effectively...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Solids and Structures
سال: 2002
ISSN: 0020-7683
DOI: 10.1016/s0020-7683(02)00480-8