Numerical Simulation of CO2 Gas Microbubble of Foamy Oil
نویسندگان
چکیده
منابع مشابه
Advanced Numerical Simulation of Gas Explosion for Assessing the Safety of Oil and Gas Plant
The authors have deeply been interested in concerns about health, safety & environment (HSE) in recent years. HSE demands in engineering, particularly at the design and construction stages, are becoming stricter and stricter. In oil and gas plants, many pieces of equipment, and much of the piping, treat highly flammable gases, such as natural gas, methane, propane and hydrogen, which if release...
متن کاملhazard evaluation of gas condensate stabilization and dehydration unit of parsian gas refinery using hazop procedures
شناسایی مخاطرات در واحد 400 پالایشگاه گاز پارسیان. در این پروزه با بکارگیری از تکنیک hazop به شناسا یی مخاطرات ، انحرافات ممکن و در صورت لزوم ارایه راهکارهای مناسب جهت افزایش ایمنی فرا یند پرداخته میگردد. شرایط عملیاتی مخاطره آمیز نظیر فشار و دمای بالا و وجود ترکیبات مختلف سمی و قابل انفجار در واحدهای پالایش گاز، ضرورت توجه به موارد ایمنی در این چنین واحدهایی را مشخص می سازد. مطالعه hazop یک ر...
3-D Numerical Simulation of Gas Turbine Combustor
This paper presents a numerical solution for a changing combustor geometry. The effects of the geometric change on the main parameters of the chamber are considered. For this purpose the original geometry and the new one are simulated numerically by a 3-D CFD code and the results are compared. Finally, comments are presented regarding this change. A model is used for turbulence modeling and a...
متن کامل3-D Numerical Simulation of Gas Turbine Combustor
This paper presents a numerical solution for a changing combustor geometry. The effects of the geometric change on the main parameters of the chamber are considered. For this purpose the original geometry and the new one are simulated numerically by a 3-D CFD code and the results are compared. Finally, comments are presented regarding this change. A model is used for turbulence modeling and a...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2014
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2014.11.816