Numerical simulation of cavitation around a two-dimensional hydrofoil using VOF method and LES turbulence model
نویسندگان
چکیده
منابع مشابه
LES of Partial Cavitation Around a 2D Plane-Convex Hydrofoil Large Eddy Simulation of Partial Cavitation Around a 2D Plane-Convex Hydrofoil
Investigations of attached partial cavitation are important because to prevent damages in hydrulic machinery and to reduce the costs. As expected computational fluid dynamics (CFD) methods have been developed for more than 40 years to understand this phenomenon and to improve the machinery designs, as pumps and hydraulic turbines. However, cavitation appears at high Reynolds numbers, so that, t...
متن کاملEvaluation of turbulence models for the numerical prediction of transient cavitation around a hydrofoil
The objective of this paper is to evaluate the predictive capability of three turbulence models for the simulation of unsteady cavitating flows around a 2D Clark-y hydrofoil. Three turbulence models were standard k-ε model, hybrid model of density correction model (DCM) and filter-based model (FBM) and an improved partially-averaged Navier-Stokes model (PANS) based on k-ε model. Using the above...
متن کاملExperimental study and numerical simulation of three dimensional two phase impinging jet flow using anisotropic turbulence model
Hydrodynamic of a turbulent impinging jet on a flat plate has been studied experimentally and numerically. Experiments were conducted for the Reynolds number range of 72000 to 102000 and a fixed jet-to-plate dimensionless distance of H/d=3.5. Based on the experimental setup, a multi-phase numerical model was simulated to predict flow properties of impinging jets using two turbulent models. Mesh...
متن کاملNumerical Simulation of Partial Cavitation over Axisymmetric Bodies: VOF Method vs. Potential Flow Theory
A computational study of partial cavitation over axisymmetric bodies is presented using two numerical methods. The first method is based on the VOF technique where transient 2D Navier-Stokes equations are solved along with an equation to track the cavity interface. Next, the steady boundary element method (BEM) based on potential flow theory is presented. The results of the two methods for a di...
متن کاملNumerical simulation of wavy falling film flow using VOF method
Surface wave dynamics of vertical falling films under monochromatic-frequency flowrate-forcing perturbations is computed by the direct simulation of Navier–Stokes equations using the Volume of Fluid (VOF) method to track free surfaces and the Continuum Surface Force (CSF) model to account for dynamic boundary conditions at free surfaces. The numerical VOF–CSF model is completely formulated, and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Mathematical Modelling
سال: 2013
ISSN: 0307-904X
DOI: 10.1016/j.apm.2012.09.002