Numerical Simulation of Cast-rolling Process for Copper-Aluminum Composite Plate

numerical simulation of residual stress distribution in al alloy plate after a cold rolling process

0

NUMERICAL SIMULATION OF RING ROLLING PROCESS FOR Ni-BASE ARTICLES

Continuous improvements of properties for individual parts are indispensable for perpetual development of aircraft engines. Concerning casing and seal, simulation of ring rolling process is one of the most attractive tools to reduce the cost and time and to improve the properties and the reliability at the same time. In order to obtain both practical prediction accuracy and acceptable computati...

Simulation of Foaming and Deformation for Composite Aluminum Foams

In this study, at the first stage, the rupture criterion of bubbles wall in Aluminum metal foam liquid was investigated by using Lattice Boltzmann. The two phases modeling were accomplished by using a modified Shan-Chen model. This model was run for several bubbles in A356+3wt.%SiC melt system. Then, bubbles morphologies (virtual metallographic) for A356+3wt.%SiC foams were simulated. Results s...

Numerical Simulation and Process Optimization on Cast Steel Bearing Sleeve

Article history: Received:29.09.2013. Received in revised form: 17.12.2013. Accepted: 24.12.2013. A three-dimensional Computer Aided Design (CAD) model of the bearing sleeve casting is established by Pro/E software. The ViewCast program is utilized for studying casting processes of solidification and mould-filling in order to optimize the casting technology. Based on the solidification simulati...

Composite Aluminum-Copper Sheet Material by Friction Stir Welding and Cold Rolling