Numerical simulation of beam-to-column joints with flange cleats

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Numerical Simulation with Fibre Beam-column Models of Thin Rc Column Behaviour under Cyclic Tension-compression

Damage to structural walls in the recent earthquakes in Chile (2010) and New Zealand (2011) demonstrated that modern reinforced concrete (RC) wall behaviour can be largely governed by out-of-plane displacements triggered by instability. Thin walls are the most vulnerable to this deformation mechanism, especially if they have a single layer of reinforcement. These wall types can be easily found ...

متن کامل

Neural Networks Assessment of Beam-to-Column Joints

This paper proposes the use of artificial neural networks to predict the flexural resistance and initial stiffness of beam-to-column steel joints using the back propagation supervised learning algorithm. Three types of steel beam-to-column joints were investigated: welded, endplate and bolted with top, seat and double web angles, respectively. The neural networks results proved to be consistent...

متن کامل

Selective Upgrade of Beam-column Joints with Composites

Many RC frames built without seismic provisions between the ’50’s and ’70’s need structural upgrade in order to match the minimum requirements of new building codes. Generally, the critical region of the strengthening design is represented by the beam-column connection. The strength hierarchy governs the upgrade requiring to protect the column and the panel so that the formation of a plastic hi...

متن کامل

Seismic Upgrade of Beam-Column Joints with FRP Reinforcement

Many opportunities are becoming available for using composite materials to strengthen/upgrade existing reinforced concrete (RC) structures. This paper focuses on a new technique for the seismic upgrade of RC beam-column connections in gravity load-designed (GLD) frames by the application (combined or not) of FRP rods and laminates. The FRP rods provide flexural strengthening, whereas the lay-up...

متن کامل

Numerical Analysis of Cyclic Behavior of Beam-To-Column Bolted Connections in Steel Frames

This article considers the seismic behavior of beam-to-column joints in steel frames for different bolt arrangements by using of finite element modeling. As the most important beam-to-column joint type, the beam-to-column joints with end-plate is chosen for the analysis. Four different specimens have been analyzed. These models had some differences such as bolt arrangement and the presence or a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: MATEC Web of Conferences

سال: 2018

ISSN: 2261-236X

DOI: 10.1051/matecconf/201817403009