Numerical Simulation of 3D Borehole‐to‐Surface Electrical Method
نویسندگان
چکیده
منابع مشابه
VIV of Tapered Cylinders: 3D LES Numerical Simulation
In the present study, the author’s previous experimental investigations on the vortex induced vibration of uniform and tapered circular cylinders are numerically simulated. The circular cylinders have medium mass ratios (5.93, 6.1), low mass-damping parameters (0.0275, 0.0279) a mean diameter of 0.028m and an aspect ratio of about 14. A fully coupled two-way fluid-structure interaction (FSI) an...
متن کامل3d Numerical Simulation of Drop Coalescence∗
The major importance of drop coalescence in a number of natural and industrial processes provides the motivation for fundamental experimental and theoretical studies on its mechanics. One of the main difficulties of such investigations is related with the presence of a thin liquid film, typically of order 10−4 of the drop size. In numerical studies of coalescence this requires very fine spatial...
متن کاملNumerical Simulation of 3D Acoustic Logging
A Finite-difference method for simulation of sonic waves propagating in a vicinity of a borehole filled with fluid and surrounded by a 3D heterogeneous elastic medium is developed. The method utilizes an explicit second order of approximation FD scheme on staggered grids that approximates the elastodynamic system of equations in cylindrical coordinates. A computational domain is surrounded by a...
متن کامل3D Numerical Simulation of the Separated Turbulent Shallow Flow around a Single Side Obstacle
In this paper, the performance of Reynolds Averaged Navier Stokes (RANS) simulations was evaluated to predict the flow structure developed by the presence of a sidewall obstruction in a uniform open-channel shallow flow. The study of these flow structures is important because they present in several real world configurations, such as groynes in rivers, where the erosion processes, mass transpor...
متن کاملOne-Dimensional design of a three-stage axial compressor with Its 3D numerical simulation
The purpose of this study is to design a three-stage axial compressor with identical pressure ratio which makes an adequate pressure ratio and efficiency in design point conditions with rotational velocity of 38000rpm and mass flow rate of 3.2kg/s. First of all, considering some restrictions such as Dehaller number more than 0.7 in all sections of the stator and the rotor, and relative Mach num...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Geologica Sinica - English Edition
سال: 2019
ISSN: 1000-9515,1755-6724
DOI: 10.1111/1755-6724.14125