Numerical Simulation for Interlaminar Damage Growth in CFRP Cross-ply laminates Under Transverse Loading
نویسندگان
چکیده
منابع مشابه
Failure Criterion for Two-Ply Plain-Weave CFRP Laminates
We present an experimentally-based failure criterion for symmetric two-ply plain-weave laminates of carbon-fiber reinforced plastic. The criterion is formulated in terms of six force and moment stress resultants and consists of a set of three inequalities, related to in-plane, bending, and combined in-plane and bending types of failure. All failure parameters in the criterion are measured direc...
متن کاملInterlaminar fatigue crack growth of cross-ply composites under thermal cycles
The fatigue growth of a fiber reinforced composite laminate was characterized under thermal cycling using a combined experimental and computational investigation. Twenty-four ply composite laminates (1⁄20 12=90 12 ) are fabricated with a pre-existing delamination, and subjected to thermal cycling in an environmental chamber. The large mismatch in the coefficients of thermal expansion is used to...
متن کاملUltrasonic NDE Techniques for Impact Damage Inspection on CFRP Laminates
This study investigates the different types of ultrasonic inspection, when applied to assess the impact damage in Carbon Fiber Reinforced Plastic CFRP laminates. The study surveys the two most used ultrasonic testing approaches first; namely the pulse-echo and the through-transmission modes. Then, the manuscript discusses and analyzes the enhanced ultrasonic testing methods that use the polar s...
متن کاملDamage in Textile Laminates of Various Inter-ply Shift
Deformation mechanisms and failure of textile laminates are strongly affected by inter-layer configurations – a mutual shift of the plies. To model it within a traditional framework, one must construct a representative volume element (RVE), which includes all the plies. This is a time consuming and computationally expensive work. As an alternative, the paper suggests boundary conditions (BC) im...
متن کاملAnalysis of Concrete Bridge Girders Strengthened with Cfrp Laminates under Service and Extreme Loading Conditions
Externally bonded carbon fiber reinforced polymer (CFRP) laminates are a feasible and economical alternative to traditional methods for strengthening and stiffening deficient reinforced concrete and prestressed concrete girders as shown in Fig. (1). Although extensive research has already been undertaken to investigate the behavior of CFRP strengthened bridge girders, the majority of work condu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 2006
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.72.1246