Numerical Simulation and Optimization of Perforated Tube Trolley in Circular Cooler
نویسندگان
چکیده
منابع مشابه
Numerical simulation of laminar convection heat transfer from an array of circular perforated fins
The present paper reports the laminar fluid flow and heat transfer of a heated array of circular-perforated and solid fins mounted over a flat surface using the finite-volume method. One to four circular cross-sectional perforations are made along the length of the fins. The SIMPLE algorithm is used for pressure-velocity coupling and the second order upwind technique is employed to discreti...
متن کامل10K Pulse Tube Cooler
A 3-stage pulse tube cooler has been designed to operate at 10¶K. The staged cooler uses the same compressor and parallel staging configuration for the 1 st and 2 nd stages as previously employed for our delivered High Capacity Cryocooler (HCC). The 2 nd and 3 rd stages are in a serial configuration. The addition of the third stage extends the performance of this cooler to lower operating tempe...
متن کاملnumerical investigation of heat transfer in circular perforated plates exposed to parallel flow and suction
unglazed transpired solar collectors are widely used for heating outside air directly, these days. pre-heating ventilation air for large spaces and heating air for crop drying, are some of the applications of these kinds of collectors. the outside air is drawn straight from ambient, uniformly through the whole surface of a perforated absorber (transpired, dark-colored plate) exposed to the sun....
متن کاملnumerical simulation of turbulent nano-fluidflow in a circular elbow
force convection heat transfer of turbulent nano fluid flow in 90 and 60 degree elbow is simulated by using fluent. single phase model has been implemented to study such a flow field and standard
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: World Journal of Engineering and Technology
سال: 2017
ISSN: 2331-4222,2331-4249
DOI: 10.4236/wjet.2017.54057