Numerical simulation and experimental investigation on the residual stresses in a laser beam welded dual phase DP600 steel plate: Thermo-mechanical material plasticity model
نویسندگان
چکیده
منابع مشابه
Mechanical Properties Improvement of Laser Tailor Welded Blanks of DP600 Steel by Magnetic Treatment
Yanli Song 1,2,3,*, Cheng Yu 1,2,3, Hailong Yu 3 and Chenyu Zhao 3 1 Hubei Key Laboratory of Advanced Technology of Automotive Parts, Wuhan University of Technology, Wuhan 430070, China; [email protected] 2 Hubei Collaborative Innovation Center for Automotive Components Technology, Wuhan University of Technology, Wuhan 430070, China 3 School of Automotive Engineering, Wuhan University of T...
متن کاملexperimental determination of residual stresses in multi-pass girth welding of thermo-mechanical steel pipe
in this paper, two api x70 steel pipes (with spiral seam weld) of 56 inch outside diameter and 0.780 inch wall thickness were girth welded first. next, hole drilling tests were conducted for strain measurement on the surfaces of the pipes. the values of residual stresses on the internal and external surfaces of the pipe were determined, from strain data using astm 837 standard. the experimental...
متن کاملNumerical Analysis of explosion effects on the redistribution of residual stresses in the underwater welded pipe
Structural health monitoring of cracked structures is one of beloved subject of researchers recently. Consider of crack behavior in the water and energy pipeline is important because of environmental problems. In this paper consider of crack parameters in the underwater pipe subjected to mechanical transient load is investigated. For this purpose, three- dimensional parametric model of cracked ...
متن کاملCharacterization of Microstructure and Mechanical Properties of Resistance Spot Welded DP600 Steel
Resistance spot welding (RSW) as a predominant welding technique used for joining steels in automotive applications needs to be studied carefully in order to improve the mechanical properties of the spot welds. The objectives of the present work are to characterize the resistance spot weldment of DP600 sheet steels. The mechanical properties of the welded joints were evaluated using tensile-she...
متن کاملNumerical and Experimental Investigation of Microstructure Evolution and Mechanical Behavior of Steel in Laser Forming
In laser forming, phase transformation and grain structural evolution in the heat affected zone (HAZ) take place under steep cooling rates and temperature gradients, and have a significant effect on the laser forming process and final mechanical properties of products. In this work, microstructure evolution during laser forming of AISI 1010 steel is experimentally and numerically investigated a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Mechanical Sciences
سال: 2017
ISSN: 0020-7403
DOI: 10.1016/j.ijmecsci.2017.01.006