Numerical Reconstruction of Residual Stress Fields from Limited Measurements
نویسندگان
چکیده
منابع مشابه
MEMS Test Structures for Residual Stress Measurements
A set of microstructures for in situ stress measurement is presented, based on a lancet principle having dedicated designs for the amplification of dimensional variation induced by internal stress of the materials. The presented technique has an advantage over the traditional rotating structures and wafer curvature measurements in terms of the simplified readout mechanism. The test structures a...
متن کاملUltrasonic Measurements of Inhomogenous Stress Fields
An acoustic technique for measuring inhomogeneous stress fields in externally loaded solids is described. This method requires a measurement of transit time of a longitudinal acoustic wave through a stressed thin metal specimen using a small diameter water-coupled acoustic transducer. The transducer is mechanically scanned over the surface of the sample by a computer controlled system to take s...
متن کاملNumerical Study of the Effect of Materials’ Plastic Behavior on Equibiaxial Residual Stress Measurement Using Indentation
Indentation is a new method for estimating residual stress. The plastic behavior of the materials under study can affect indentation parameters and, thus, influences the results of residual stress measurement. In this paper, the effect of yield stress and work-hardening exponent on the accuracy of residual stress measurements in steels and aluminums was studied. Results showed that, for m...
متن کاملTomographic reconstruction from limited data
Introduction At present, image reconstruction in micro-CT imaging is typically performed using the FDK algorithm. This algorithm, which is similar to the Filtered Backprojection algorithm for singleslice tomography, is capable of computing accurate reconstructions in a relatively short time, provided that the acquired dataset satisfies certain requirements: (i) a large number of projection imag...
متن کاملResidual Stress Measurements of Cast Aluminum Engine Blocks Using Diffraction
Residual stresses and strains in as-cast and annealed aluminum engine blocks were mapped in the main web area above the bearing split using diffraction. Automated coordinate-mapping of the surface and bulk strains was accomplished with X-ray and neutron diffraction, respectively. LabVIEW-based software was developed for improved efficiency, flexibility and quality of data analysis. In the hoop ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Materials Research
سال: 2014
ISSN: 1662-8985
DOI: 10.4028/www.scientific.net/amr.996.243