Numerical prediction of boundary layer flows with the anisotropic k-.EPSILON. turbulence model.
نویسندگان
چکیده
منابع مشابه
A note on the numerical treatment of the k-epsilon turbulence model
Numerical solution of the equations arising from the turbulence model has difficulties inherent to nonlinear convection-reaction-diffusion equations with strong reaction terms, resulting in that numerical schemes easily become unstable. We present a formulation that stresses on the robustness of the solution method, tackling common problems that produce instability. The main contribution concer...
متن کامل2DV Nonlinear k-ε Turbulence Modeling of Stratified Flows
The commonly used linear k-ε turbulence model is shown to be incapable of accurate prediction of turbulent flows, where non-isotropy is dominant. Two examples of non-isotropic flows, which have a wide range of applications in marine waters, are saline water flow and the stratified flows due to temperature gradients. These relate to stratification and consequently, variation of density through...
متن کاملStudy of Parameters Affecting Separation Bubble Size in High Speed Flows using k-ω Turbulence Model
Shock waves generated at different parts of vehicle interact with the boundary layer over the surface at high Mach flows. The adverse pressure gradient across strong shock wave causes the flow to separate and peak loads are generated at separation and reattachment points. The size of separation bubble in the shock boundary layer interaction flows depends on various parameters. Reynolds-averaged...
متن کاملA Turbulence Dissipation Correction to the k-epsilon Model and Its Effect on Turbulence Length Scales in Engine Flows
Non-equilibrium turbulence considerations from rapid distortion theory have been utilized to derive a correction to the turbulence dissipation rate, which then has been implemented in combination with the RNG k-epsilon model in a KIVA-based code. This correction reflects the time delay between changes in the turbulent kinetic energy due to changes in the mean flow and its turbulence dissipation...
متن کاملNumerical Simulation of Separation Bubble on Elliptic Cylinders Using Three-equation k-? Turbulence Model
Occurrence of laminar separation bubbles on solid walls of an elliptic cylinder has been simulated using a recently developed transitional model for boundary layer flows. Computational method is based on the solution of the Reynolds averaged Navier-Stokes (RANS) equations and the eddy-viscosity concept. Transitional model tries to simulate streamwise fluctuations, induced by freestream turbulen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 1990
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.56.3305