Numerical optimization of a waste-to-energy plant's operating parameters using CFD
نویسندگان
چکیده
منابع مشابه
CFD ANALYSIS OF NOx FORMATION IN WASTE-TO-ENERGY SYSTEMS USING DETAILED CHEMICAL KINETIC MODELING
This study was undertaken to better understand the governing processes and reaction conditions under which NOx is produced in Waste to Energy (WtE) boilers. A three dimensional CFD model was created and calculated using the GRI 3.0, 50 species, 309 step detailed chemical kinetic model (DCKM) for methane/ethane combustion. Model results for primary NOx emissions and other pollutants agree well w...
متن کاملChemically synthesized biofuels from agricultural waste: Optimization operating parameters with surface response methodology (CCD)
Bioethanol is one of the most important alternative renewable energy sources that substitute the fossil fuels. Sugarcane bagasse has a content of cellulose and hemicelluloses, which make it suitable as fermentation substrate when hydrolyzed. The objective of work is ethanol production from sugarcane bagasse (SCB) by the fermentation process. Eight laboratory experiments were conducted to produc...
متن کاملthe role of russia in transmission of energy from central asia and caucuses to european union
پس ازفروپاشی شوروی،رشد منابع نفت و گاز، آسیای میانه و قفقاز را در یک بازی ژئوپلتیکی انرژی قرار داده است. با در نظر گرفتن این منابع هیدروکربنی، این منطقه به یک میدانجنگ و رقابت تجاری برای بازی های ژئوپلتیکی قدرت های بزرگ جهانی تبدیل شده است. روسیه منطقه را به عنوان حیات خلوت خود تلقی نموده و علاقمند به حفظ حضورش می باشد تا همانند گذشته گاز طبیعی را به وسیله خط لوله مرکزی دریافت و به عنوان یک واس...
15 صفحه اولNumerical Modeling of Pollution Formation in Waste-to-energy Systems Using Computational Fluid Dynamics
This investigation has been undertaken to better understand pollutant formation in Waste-to-Energy (WTE) systems by using Computation Fluid Dynamics (CFD). An above-grate gas phase only model was built and calculated in FLUENTTM with the intent of specifically studying the factors that influence the formation of NOx. Results are shown for a typical reciprocating-grate WTE boiler operating on mu...
متن کاملNumerical Analysis of a Helical Coiled Heat Exchanger using CFD
Heat exchangers are the important equipments with a variety of industrial applications including power plants, chemical, refrigeration and air conditioning industries. Helically coiled heat exchangers are used in order to obtain a large heat transfer area per unit volume and to enhance the heat transfer coefficient on the inside surface. This paper deals with the CFD simulation of helical coile...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Thermal Science
سال: 2011
ISSN: 0354-9836,2334-7163
DOI: 10.2298/tsci101004084k