Numerical modelling of transonic centripetal flow in radial turbine blade cascade
نویسندگان
چکیده
منابع مشابه
Ducted Turbine Blade Optimization Using Numerical Simulation
This paper presents a combined blade element (BE), computational fluid dynamics (CFD) method for performance analysis and optimization of ducted turbines. The model is similar to standard blade element momentum theory, except that CFD replaces the momentum equation for determining the induction factors. This eliminates many assumptions used in applying the typical blade element momentum (BEM) t...
متن کاملEffect of Wake Disturbance Frequency on the Secondary Flow Vortex Structure in a Turbine Blade Cascade
An experimental study of the effect of wake disturbance frequency on the secondary flow vortices in a two-dimensional linear cascade is presented. The flow Reynolds numbers, based on exit velocity and suction side surface length were 25,000, 50,000 and 85,000. Secondary flow was visualized by injecting smoke into the boundary layer and illuminating it with a laser light sheet located at the exi...
متن کاملTurbine Blade Tip Leakage Flow Control: Thick/Thin Blade Effects
An experiment was conducted in a linear cascade of Pak-B blades for an exit Mach number of 0.3 to simulate the flow in the tip-gap region of a low pressure turbine blade row. The experiment focused on the independent effects of thickness-to-gap and gapto-chord ratios on the tip-gap flow behavior. Two extreme gap-to-chord ratios of 5% and 8% were chosen, for which four thickness-to-gap ratios we...
متن کاملTurbine Blade Cascade Heat Transfer Analysis Using CFD –A Review
Heat transfer analysis on a turbine blade cascade using CFD is reviewed in this paper based upon the literature available. The flow conditions across turbine blades are complex because of three dimensional configuration of the blade. Axial flow turbine blade design is hectic because understanding of control flows, prediction and analysis is a tedious task. The flow behaviour in a turbine blade ...
متن کاملInfluence of Blade Profiles on Flow around Wells Turbine
The Wells turbine rotor consists of several symmetric airfoil blades arranged around a central hub, and the stagger angle is 90 degrees. These characteristics simplify the total construction of OWC type wave energy converters. Although the Wells turbine is simple, the turbine produces a complicated flow field due to the peculiar arrangement of blades, which can rotate in the same direction irre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2018
ISSN: 2261-236X
DOI: 10.1051/matecconf/201816802008