Numerical Modelling of Soil Arching in a Shallow Backfill Layer
نویسندگان
چکیده
منابع مشابه
Numerical Modelling of Backfill Grouting Approaches in EPB Tunneling
One of the main issues involved during tunnel construction with tunnel boring machines is the tail gap grouting. This gap is between the external diameter of tunnel lining and the excavation boundary that is filled with high-pressure grouting materials. In this work, three different approaches of gap grouting modeling in the FLAC3D software are investigated with a special attention to the...
متن کاملA Numerical Evaluation of Seismic Response of Shallow Soil Deposits
This paper employs one-dimensional numerical ground response analysis models to investigate seismic response of shallow cohesive and non-cohesive soil deposits on vertical propagation of horizontal shear waves. Soil response is modelled by traditional equivalent-linear (EL) frequency-domain analysis using DEEPSOIL software and nonlinear (NL) time-domain analysis using OPENSEES software. The ana...
متن کاملPipeline upheaval buckling in clayey backfill using numerical analysis
Offshore pipelines used for oil and gas transportation are often buried to avoid damage from fishing activities and to provide thermal insulation. Thermal expansion and contraction of the pipeline during operation can lead to lateral or upheaval buckling. A safe buried pipeline design must take into account a reliable evaluation of soil uplift resistance and pipe embedment depth. While the cost...
متن کاملExperimental and Numerical Studies of Load Transfers and Arching Effect
Experimental and numerical tests of the trap-door problem have been carried out, involving several granular materials. Three phases have been observed in the load transfer mechanism, as the trap-door is moved downward. The classical pattern for the description of this type of problem (a vertical plane of failure at each edge of the trap-door) corresponds to the third phase observed. The previou...
متن کاملNumerical Modelling of Mechanical Behavior of Coal Mining Hard Roofs in Different Backfill Ratios: A Case Study
In coal mining hard roofs are one of the main factors causing the occurrence of rock bursts in working panels. To solve this problem, the solid backfill coal mining (SBCM) technique is proposed and used as an effective measure to prevent the rock bursts induced by hard roofs. However, due to the different backfill ratios of working planes, the control effects on hard roofs are quite unique. By ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Civil And Environmental Engineering Reports
سال: 2015
ISSN: 2450-8594,2080-5187
DOI: 10.1515/ceer-2014-0039