Numerical modelling of RC strengthened columns under biaxial loading

Behaviour of FRP strengthened concrete columns under eccentric compression loading

This paper presents results of testing eccentrically loaded columns externally wrapped with two types of materials. Six cylindrical (205 mm diameter and 925 mm height) plain columns were cast and tested. Half of the columns were wrapped with GFRP and the other half with CFRP. All columns were tested by applying an axial load at 50 mm eccentricity. In each group (GFRP or CFRP wrapped) of columns...

Structural behaviour of RC beams externally strengthened with FRP sheets under fatigue and monotonic loading

This paper presents experimental research on the fatigue and post-fatigue static behaviour of reinforced concrete beams strengthened with glass or carbon fibre reinforced polymer (FRP) sheets placed either vertically or obliquely. All beams for fatigue tests were subjected to four-point bending for one million cycles with a frequency of 5 Hz. The results show that the FRP sheets can be used to ...

Numerical Simulation of FRP-Jacketed RC Columns Subjected to Cyclic Loading

This paper presents a study that forms part of an ongoing project on the seismic retrofit of reinforced concrete (RC) structures with fibre-reinforced polymer (FRP). In this study, a stress-strain model for FRP-confined concrete subjected to cyclic loading was implemented into OpenSees to support the performance-based design of FRP jackets for the seismic retrofit of RC columns/structures. Init...

An Analytical Method for the Evaluation of the RC Columns Capacity Strengthened by Concrete Overlays

numerical and sensitivity analysis of rc beams strengthened with frp

in this paper, using numerical methods and test results, the behavior of reinforced concrete beams strengthened with fiber-reinforced polymers (frp) is investigated. in the numerical analysis, the concrete damaged plasticity model is used for considering the nonlinear behavior and strain softening of concrete. the abaqus finite element program is utilized for the analysis of 12 flexural beams s...