Numerical modelling of pullout of helical soil nail
نویسندگان
چکیده
منابع مشابه
Numerical investigation on the pullout shear strength of soil-nail interface using finite element method
Soil nailing is a popular reinforcement method for stabilizing slopes, excavations, and retaining walls in many countries. The pullout capacity of the soil-nail interface is a critical parameter for the design and safety assessment of soil-nailed systems. In this paper, a three-dimensional (3D) finite element (FE) model is developed using the commercial program ABAQUS to simulate the pullout te...
متن کاملNumerical Modelling of the Segmental Lining of Underground Structures
There are several methods for analysing the behaviour of underground structures under different loading conditions. Most of these methods have many simplifications; therefore, in some cases, the results are too conservative and a very high safety factor, usually of more than 2 is needed. On the other hand, for stability analysis and the designing of support systems, these methods consider segme...
متن کاملModelling Dispersion Characteristics of Circular Optical Waveguide with Helical Winding– Comparison for Different Pitch Angles
In this Article dispersion characteristic of conventional optical waveguide with helical winding at core – cladding interface has been obtained. The model dispersion characteristics of optical waveguide with helical winding at core-cladding interface have been obtained for five different pitch angles. This paper includes dispersion characteristics of optical waveguide with helical winding, and ...
متن کاملNumerical modelling of induced rip currents by discontinuous submerged breakwaters
Submerged breakwaters are one of the shore protective structures. Any discontinuity in these breakwaters causes changes on current parameters including speed and water surface profile. In this paper, discontinuous submerged breakwaters were modelled to investigate the changes in the wave and flow pattern.To investigate the phenomenon, three models including a shore with constant slope, a shore ...
متن کاملNumerical Study on Residual Thermal Stresses in Carbon Fibre Pullout
This paper investigated the effect of residual thermal stresses on carbon fibre pullout by using cohesive zone modelling. The finite element method was applied to analyse the residual thermal stress components along the interface between the fibre and matrix due to curing. A comparison study on the anisotropic and isotropic material properties are considered using four typical carbon fibres, T3...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Rock Mechanics and Geotechnical Engineering
سال: 2017
ISSN: 1674-7755
DOI: 10.1016/j.jrmge.2017.01.007